ANALYSIS AND IMPROVEMENT OF METHODS AND FACILITIES FOR SUPPORTING THE GATE ROADS

Details

Parent Category: Geo-Technical Mechanics, 2014

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 115

UDC 622.281.001.2

Authors:

 S. I.Skipochka D. Sc. (Tech.), Professor,

V. N.Tripolski, M.S (Tech.),

N. A.Buriyk, M.S (Tech.),

Т. G.Vojtovich, Doctoral Student

(IGTM NAS of Ukraine)

Abstract.

Object of this work is supporting of the gate roads by metal frame supports in the coal mines. Om the basis of analysis of methods and facilities used for gate-road supporting the purpose of the work was formulate: to analyze reasons of unsatisfactory work of and to work out recommendations for improvement of the arched metal-frame supports of the gate roads in general. It is shown that unsatisfactory operation of the metal-frame support is caused by its improper yielding. Functionality of the interlock grooved profile was estimated with the help of calculations. Comparative analysis of the metal-frame supports results in a conclusion that the open grooved profiles cannot be recommended to be used in the complex geological conditions. The conclusion is that for proper supporting the gate roads, it is necessary to apply combined methods, which are based on combination of metal-frame and anchor supports of the new generation and protective rib-side pack. Technical requirements are formulated for designing supports of the new generation.

Keywords:

gate road, arched yielding metal support, interlocks.

References:

1. Radchenko, V. V. and Chuprina, E. S. (1991) “Perfection of the methods preparatory works protection in Donbass”, Coal of Ukraine, no.11, pp. 30-34.

2. Usachenko, B. M., Kirichenko, V. Ya. and Shmigol, A. V. (1992), Okhrana podgotovitelnykh vyrabotok glubokich gorizontov shacht Zapadnogo Donbassa [Protection of preparatory workings deep horizons of the Western Donbass mines], CSIIEIcoal, Moscow, Russia.

3. Usachenko, B. M., Kirichenko, V. Ya. and Shmigol, A. V. (1992), Opyt okhrany magistralnykh i vyemochnykh chtrekov na glubokich gorizontakh [Experience protection of the main and excavation in the deep horizons], CSIIEIcoal, Moscow, Russia.

4. Kompaneez, V. F., Cytnik, A. A. and Zygaev, F. C. (1988), “New special profiles of rolling for mining supports”, Mine construction, no.10, pp. 15-17.

5. Litvinskij, G. G. and Fesenko, E. V. (2012) “Research of rolling profiles effectiveness for frame support mining”, Coal of Ukraine, no.11, pp. 11-14.

About the authors:

Skipochka Sergej Ivanovitch, Doctor of Technical Sciences (D. Sc), Professor, Head of Department of Rock Mechanics, The Polyakov Institute of Geotechnical Mechanics of the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Tripolski Valerij Nikolaevich, Master of Science, Principal Specialist in Rock Mechanics Department, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, igtm.nanu@yandex.ru 

Burjak Nikolaj Afanasievich, Master of Science, Principal Specialist in Rock Mechanics Department, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, igtm.nanu@yandex.ru 

Vojtovich Tatiana Gennadievna, Doctoral Student in the Department in Rock Mechanics Department, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, vojtovich.leonid@yandex.ru

• < Prev
• Next >