STRESS-STRAIN STATE OF THE MINE MASSIF AROUND THE CHAMBERS OF THE SECOND STAGE OF MINING

UDC  622.273.217.4

Authors:

M.N. Kononenko, Ph.D. (Tech.), Associate Professor,

M.V. Petlyovany, Ph.D. (Tech.)

(SHEЕ “NMU”)      

S.A. Zubko, M.S.(Tech.)

(CJSC “ZZhRK”)

Abstract.

A stress-strain state of the rock mass around the chambers of the second stage of mining was analyzed with the help of thermodynamic method. This study is the question of the day    as the ore reserves in the chambers of the second stage of mining are, as a rule, extracted being surrounded by the filling mass, and due to this the highest rates of the ore losses and contamination with the filling mass are observed. In connection with this, the study of the stress-strained state of the filling mass and establishment of a method for improving the massif stability presents a great interest today. A calculation scheme for modeling thermodynamic processes in the rock mass around the chambers was developed with the purpose to study the stress field and determine principles of radial stress changing in the filling mass of the surrounding chamber. A chamber in the layer at the depth of 740-840 m was simulated with the following average geotechnical conditions: depth of the extraction chamber, angle of the deposit depression, horizontal thickness of deposit, rock strength in the hanging layer against uniaxial compression, rock strength in the bottom layer against uniaxial compression, and stowing strength against uniaxial compression. The study determined areas with tensile stress in the rocks of the bottom layer, ore mass and filling mass, and their parameters (size, maximum tension) and formulated empirical equations for the dependences between radial tensions and distance to the chambers L of the second stage of mining. The areas of destructive deformation and their dimensions in the stowing mass around the chambers of the second stage of mining at the level 740-840 m were established. Maximum values are defined for the stresses acting in the stowing mass which, exceeding the ultimate strength, cause the mass failure into the space of the chamber of the second stage. In order to prevent the stowing mass failure it is recommended to make a consolidating layer of the solid stowing at the 2/3 height of the chamber in order to resist the high tensile stresses and to ensure the mass stability.

Keywords:

 Unload area, radial stress, stowing mass, strength of the solid stowing.

References:

1. Scientific-research ore mining institute (2011), Instruktsya dlya opredeleniya pokazateley poter i zasoreniya rudy pri proektirovanii otrabotki vyemochnykh edinits Yuzhno-Belozerskogo mestorozhdeniya, Krivoy Rog, Ukraine.

2. Boguslavskiy, E.I. and Minaev, D.U. (2005), “Technology rising mine production at great depths”, Gorniy informacionno-analiticheskiy bulleten, no.2, pp. 161-165.

3. Perepelitsa, V.G., Kolomiec, A.N. and Shmatovskiy, L.D. (2006), “Solution for the stress-strain state of a rock during its fracturing”, Dopovidi NAN Ukrainy, no.12, pp. 44-51.

4. Kaplenko, U.P. and Tsarikovskiy, V.V. (2005), “Effect of stress state rock massif geological conditions on the parameters of outcrops and form of treatment chambers”, Razrabotka rudnykh mestorozdeniy, no.88, pp. 21-24.

5. Kuzmenko, A.M., Usatiy, V.U. and Usatiy, V.V. (2004) “Investigation of the stress-strain state of the inclined surface around high chambers with hardening backfill”, Geo-technical Mechanics, no.49, pp. 129-133.

6. Lyashenko, V.I. and Golik, V.I. (2004), “Scientific bases of state management of mountain ranges by preparing for production of ore bodies”, Proceedings of the International scientific conference “Sustainable development of the mining and metallurgical industry, Krivoj Rog, vol. 1, pp. 39-44.

7. Kuzmenko, A.M. and Petlyovany, M.V. (2013), “Status and prospects of filling operations in underground mines of Ukraine”, Geo-technical Mechanics, no. 110, pp. 89-98.

8. Kuzmenko, A.M., Ulanova, N.P., Prikhodko, V.V., Usatiy, V.U. and Usatiy, V.V. (2004), “ High stability of the high secondary chambers surrounded multimodulus array in the development of iron ore deposits, Geo-technical Mechanics, no. 48, pp. 82-86.

9. Russkikh, V., Yavorskiy, A., Chistyakov, Ye. and Zubko, S. (2013), “Study of rock geomecanical processes while mining two-level interchamber pillars” CRCPress/BalkemaTaylor & FrancisGroup, London, United Kingdom.

10. Khomenko, O.Ye and Kononenko, M.N. (2003), “Justification of threaded fastening technology developments in conditions CJSC “ZZhRK””, Naukovyi  visnyk  Natsionalnohо hirnychoho universitetu, no.7, pp. 15-17.

11. Kononenko, M.N. (2009), “Improving technology mounting threaded openings in the zone of influence of the extracting space”, Proceedings of the 3th International scientific conference “School of Underground Mining”, Yalta, pp. 514-524.

12. Educational, research and production portal ”Rudana” (2009), Electronic Resources: the modern level of development of the theory of rock pressure, available at http://www.rudana.in.ua/sovr_uroven.htm. (Accessed 9 January 2014).

About the authors:

Kononenko Maxim Nikolaevich - Candidate of Technical Sciences (Ph.D), Associate Professor of department of underground mining, SHEE "National Mining University", Dnipropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Petlyovany Mikhail Vladimirovich- Candidate of Technical Sciences (Ph.D), аssistant of department of underground mining, SHEE "National Mining University", Dnipropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Zubko Sergej Andreevich – Masner of Science, Head underground station of mining operations mine “Ecsplyatacionnaja”, CJSC “ZZhRK”, Dniprorudne, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Attachments:
FileDescriptionFile size
Download this file (15.pdf)15.pdfSTRESS-STRAIN STATE OF THE MINE MASSIF AROUND THE CHAMBERS OF THE SECOND STAGE OF MINING587 kB