HIGH-ANGLE CONVEYORS IN THE MINING INDUSTRY AND THEIR POSSIBLE USE IN DEEP QUARRIES OF KRIVBAS

Details

Parent Category: Geo-Technical Mechanics, 2014

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 118

UDC [622.647:621.867]:622.271.012.3

Authors:

Babiy K.V., Ph.D. (Tech.), Senior Researcher (IGTM NAS of Ukraine)

Shevchenko А.I., Ph.D. (Tech.), Senior Researcher (IGTM NAS of Ukraine)

Ikol А.А., M. S. (Tech.) (IGTM NAS of Ukraine)

Abstract.

Objective of the work is to study possibility to use high-angle conveyors as part of cyclical-and-continuous technology in the deep quarries of Krivbass.

The article formulates basic problems of iron ore surface mining in Krivoy Rog associated with the rock transportation. It is stated that the most rational solution of these problems is to use cyclical-and-continuous technology with high-angle conveyors in the districts listed in the article. Basic designs of high-angle conveyors suitable for transporting abrasive rocks are analyzed. Experience of using conveyors in the mining industry is reviewed. Engineering and designing developments of high-angle conveyors for transporting highly abrasive lumpy iron ore are considered.

Analysis of existing and new high-angle conveyors showed that only conveyors with pressure deeply-grooved belt and retaining elements, of elevator-type with bucket can be used in Krivbass quarries. According to the findings, high-angel conveyors with pressure belt are known best of all, and deeply-grooved belts are the most promising.

Keywords:

high-angel conveyor, deeply grooved belt, cyclical-and-continuous technology, abrasive rocks, roller, belt.

References:

1. Chetverik, M.S., Peregudov, V.V., Pomanenko, A.V. et all. (2012), Tsiklichnono-potochnaya tekhnologiya na glubokikh karerakh. Perspektivy razvitiya [Cyclic-flow technology in deep pits. prospects of development ],  Dionis, Krivoy Rog, Ukraine.

2. Kasatkin, A.A.(2007), “Comparative evaluation of steeply inclined belt conveyors for the mining industry”, Available at: http://www.giab-online.ru/files/Data/2007/9/15_Kasatkin.pdf, (Accessed 12 September 2014).

3. Kotilevskiy, A.V. (2009),  “Two-tape steeply inclined conveyors”, Available at: http://www.jurnal.org/articles/2009/mash3.html, (Accessed 12 September 2014).

4. Palke, Yu. and  Gunter, R. (2003), “Expanding the scope of the vertical conveyor systems and FLEXOWELL POCKETLIFT through the use of high-strength components made of steel and Kevlar, the tensile”, Gornyi zhurnal. no. 1, pp. 16; 48.

5. Schroeder, Th. A., Intere Systems, a division of Enduro Systems, Inc. (2002) , Enclosed belt conveyor assembly, U.S., Pat. 6,681,921.

6. Galkin, V.I., Dmitriev, V.G.,Dyachenko V.P. et all (2005), Sovremennaya teoriya lentochnikh konveyerov gornikh predpriyatiy [The modern theory of belt conveyors mining enterprises], MGGU, Moscow, Russia.

7. Mulukhov, K.K. and Beslekoeva Z.N. (2012), “Design and calculation of steeply inclined belt conveyor wheel lumpy cargo and deep pits”,  Gorniy informatsionno-analiticheskiy byulleten, no. 5,  pp. 253-258.

8. Mulukhov, K.K.. (2000), Lentochno-kolesnie konveyery [Belt conveyors wheel],  SKGTU, Vladikavkaz, Russia.

9. Monastyrskiy, V., Maksyutenko, V., Vynogradov, V., Kiriya, R., Braginets, D., Mostovoy, B. M.S. Poljakov Institute of Geotechnical Mechanics under NAS of Ukraine (2011), Vertykalniystrichkoviykonveierzbagatopunktovymzavantazhennyam [Vertical conveyor with multicast load], State Register of Patents of Ukraine, Kiev, UA, Pat. № 98580.

10. Erofeeva, N. And  Zakharov, A. Lentochniykonveyer [Belt conveyor], State Register of Patents of Russia, Moscow, RU, Pat. № 82687.

About the authors:

Babiy Katerina Vasilevna, Candidate of Technical Sciences (Ph.D), Senior Researcher, Senior Researcher in Department of Geomechanics of Mineral Opencast Mining Technology M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Shevchenko Аleksandr Ivanovich, Candidate of Technical Sciences (Ph.D), Senior Researcher, Senior Researcher in Department of Geomechanics of Mineral Opencast Mining Technology M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Ikol Аlecsandr Аlekseevich, Master of Science, engineer in Department of Geomechanics of Mineral Opencast Mining Technology M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

• < Prev
• Next >