Pişkin B., Sağlam R. The important role of retrofitting in agricultural machinery: a case study for techniques and applications

The important role of retrofitting in agricultural machinery: a case study for techniques and applications

Pişkin B., Sağlam R.

Authors:

Pişkin B., Asst. Prof. (Harran University of Turkey),
Sağlam R., Prof. (Harran University of Turkey)

UDC 631.171

Language: English

Abstract.

The article provides a comparative analysis of important role of retrofitting in agricultural machinery. Over the last fifteen years, many new technologies have been developed for, or adapted to, agricultural use. Examples of these include: low-cost positioning systems, such as the Global Positioning System, proximal biomass and Leaf Area Index (LAI) sensors mounted on-board agricultural machinery, geophysical sensors to measure soil properties and low-cost, reliable devices to store and exchange/share the information. Combined, these new technologies produce a large amount of affordable high resolution information and have lead to the development of fine-scale or site-specific agricultural management that is often termed Precision Agriculture. Farming moves into the 21st century with tractors carrying satellite navigation receivers, radar guns, and computers. socio-agricultural systems and, as a consequence, adopters are currently becoming more and more complex in current economies and it might prove difficult to analyse patterns and forecast trends. The conclusions of this study are of course tentative. Hence, there is need for much more detailed research and analysis concerning the attitudes of adopters of innovations in agricultural tractors, in particular in the presence of fast-changing scenarios due to a more and more acceleration of technological change.

Keywords:

precision agriculture, retrofitting of agricultural machinery, retrofitting, innovation in agricultural machinery

References:

1. Birkeland Janis, (2009), “Eco Retrofitting from Managerialism to Design”, Proceedings of Global Forum – Business as an Agent of World Benefit, United States of America, Cleveland, Ohio, 2-5 June 2009, Cleveland, pp. 1-15.

1. Blackmore, S.B., Stout, B., Wang, M. and Runov, B. (2005). “Robotic agriculture”, In: J. Stafford (Ed.), Proc. of the 5th European Conference on Precision Agriculture, Uppsala, Sweden: Wageningen Academic Publisher.

2. Capacci, E. and Rondelli, V., (2010), “Evaluation of Testing Procedures for ROPS Fitted on Self-propelled Agricultural Machinery” International Conference Ragusa SHWA 2010 – Work Safety and Risk Prevention in Agro-food and Forest System, Ragusa Ibla Campus, Italy, pp. 202-209.

3. Coccia, M., (2005), “Measuring intensity of technological change: the seismic approach”, Technol. Forecasting Soc, no. 72 (2), pp 117-144.

4. Comis, D., (1998), “High-Tech retrofitting of farm machinery”, Agricultural Research Journal, November, Vol. 46, Issue 11, p 20.

5. Daberkow, S.G. and McBride, W.D. (2000), “Adoption of Precision Agriculture Technologies by U.S. Farmers”, 5th International Conference on Precision Agriculture, Bloomington, Minnesota, USA, pp. 1821-1831.

6. Ferrari, E., Bollani, L., Coccia, M. and Cavallo, E., (2013), “Technological Innovations in Agricultural Tractors: Adopters’ behaviour towards new technological trajectories and future directions”, Working paper Ceris-CNR 15 (5). Torino, Italy.

7. Ferrari, E., Bollani, L. and Coccia, M. (2014), “Attitudes and behaviour of adopters of technological innovations in agricultural tractors: A case study in Italian agricultural system”, Agricultural System, vol. 130, pp. 44-54.

8.  Fennimore, S.A., Tourte, L., Rachuy, J.S., Smith, R.F. and George, C. (2010), “Evaluation and economics of a machine-vision guided cultivation program in broccoli and lettuce”, Weed Tech., vol. 24(1), pp. 33‑38.

9. Griepentrog, H.W., Christensen, S., Søgaard, S., Nørremark, H.T., Lund, M. and Graglia, E. (2004). “Robotic weeding”, AgEng 2004 Engineering the Future, Leuven, Belgium, 12 – 16 September 2004.

10. Heraud, J.A. and Lange, A.F. (2009), “Agricultural automatic vehicle guidance from horses to GPS: How we got here, and where we are going”, Agricultural Equipment Technology Conference, Louisville, Kentucky, USA, February 8-11 2009, no. 33. pp. 1-67.

11. Iftikhar, N. and Pedersen, T.B. (2011), “Flexible exchange of farming device data”, Comput.Electron. Agric, no. 75 (1), pp. 52-63.

12. Korsching, P.F. (2001), “New technologies for rural America: boon or bane?”, Technol.Soc., no. 23 (1), pp. 73-77.

13. Leica Geosystems AG. (1999). “Introduction to GPS (Global Positioning System)”, Heerbrugg, Switzerland: Leica Geosystems AG.

14. Anderson, M.O., Kinoshita R.A., McKay M.D., Willis W.D., Gunderson R.W. and Flann N.S. (1999), “Mobile Robotic Teams Applied to Precision Agriculture”, 8th International Topical Meeting on Robotics and Remote Systems, Pittsburgh Pennsylvania, U.S.A., April 25-29 1999, Log no. 34 pp. 1-11.

15. McBratney, A., Whelan, B., Ancev, T. and Bouma, J. (2005) “Future directions of precision agriculture”, Precision Agriculture, vol. 6, no. 1, pp. 7‑23.

16. Ong Kim Sun, G. and Gibbings, P. (2005), “How well does the virtual reference station (VRS) system of GPS base station perform in comparison to conventional RTK?”, Journal of Spatial Science, 2005, vol. 50, no. 1, pp. 59‑73.

17. Pérez-Ruiz, M. and Upadhyaya, S.K. (2012), “GNSS in precision agricultural operation”. In F. Elbahhar (ed.), New Approach of Indoor and Outdoor Localization Systems, InTech, pp. 1-26.

18. Reece, J.D. (1999), “From simple crops to complex ecosystems: agricultural research and the environmental imperative”, Technovation, no. 19 (6-7), pp. 423-432.

19. Rude, D., Ingram, M. and Wassermann, J. (2003), “Final Report of Safe agricultural Machinery Devices Project”, Prairie Agricultural Machinery Institute Proje, no. 5003E, Canada.

20. Sassenrath, G.F., Heilman, P., Luschei, E., Bennette, E., Fitzgerald, G., Klesius, P., Tracy, W., Williford, J.R. and Zimba, P.V. (2008), “Technology, complexity and change in agricultural production systems”, Renewable Agriculture and Food Systems, vol. 23, no. 4, pp. 285‑295.

21. Tisseyre, B., Taylor, J. (2006), “An overview of methodologies and technologies for implementing precision agriculture in viticulture”, XII Congresso Brasileiro de Viticultura e Enologia – Anais, 22 a 24 de setembro de 2008, Bento Gonçalves, RS, pp. 45-54.

22. Vieweg, H.G. (ed.), (2012), “An introduction to mechanical engineering: study on the competitiveness of EU mechanical engineering industry”, European Commission. available at: http://ec.europa.eu/enterprise/sectors/mechanical/files/competitiveness/comp-mech-eng-2012-frep_en.pdf (accessed January 2013).

23. Von Pentz, M. (2011), “On our way to a global company”, In: Plenary Lecture of the 69th Conference Land Technik-AgEng, Hannover, Germany, 11–12th November.

24. Zhang N., Wang, M.-H., Wang N., (2002), “Precision Agriculture – A World Overview”, Computer and Electronics in Agriculture Journal, vol. 36, no. 2-3, pp. 113-132.

About the authors:

Pişkin Bülent, Asst. Prof. in Agricultural Machinery Technology and Engineering dept. Harran University of Turkey, This email address is being protected from spambots. You need JavaScript enabled to view it.

Sağlam Ramazan, Prof. in Agricultural Machinery Technology and Engineering dept. Harran University of Turkey

Attachments:
FileDescriptionFile size
Download this file (sb133-13.pdf)sb133-13.pdf 462 kB