Rubel A.O. Research of operation features and development of requirements for maintenance of structures of rope-profile guides in the shaft equipment

Geoteh. meh. 2022, 162, 48-65

https://doi.org/10.15407/geotm2022.162.048

 

RESEARCH OF OPERATION FEATURES AND DEVELOPMENT OF REQUIREMENTS FOR MAINTENANCE OF STRUCTURES OF ROPE-PROFILE GUIDES IN THE SHAFT EQUIPMENT

Rubel A.O.

State Enterprise«United Company «Ukrvuglerestrukturyzatsiya»

UDC 622.6:622.674:622.673.1

Language: English

Abstract. In this work, the existing normative methods for maintaining shaft equipment of mine vertical shafts were investigated and methods for maintaining shaft equipment with rope-profile guides, console-damper buntons, tension devices in the sump part of the shaft and in the pile driver were developed. Interrelations of processes: operation - maintenance - repair in the system of mechanisms were investigated for developing decision-making algorithms to determine the actual state and predict the residual life of the elements, on the basis of which the choice of a system for repair and maintenance of equipment is made. This article contains a study of the advantages and disadvantages of existing types of reinforcement and their comparative analysis with cable-profile reinforcement.
The use of this study results in relation to the mine shaft equipment with rope-profile guides (hereinafter – the RPG) will allow:
- to reduce the risk of emergencies;
- to develop an optimal system for carrying out repair and maintenance work;
- to optimize repair and maintenance costs (spare parts, components, labor resources, number of repair personnel, etc.);
– reduced labor intensity of maintenance and operation, compared to rigid reinforcement;
– reduced metal consumption compared to rigid reinforcement;
– increased reliability of the kinematic connection in the "vehicle–RPG" system due to the use of bunton legs with connecting inserts;
– reduced safety gaps per side – 350 mm for skip hoists, and – 500 mm per side for cage hoists along the entire depth of the shaft as for flexible reinforcements;
– exclusion of the use of fender ropes;
– increased service life of rope-profile guides to the level of guides for rigid shaft reinforcement.
Keywords: mine vertical shafts, rope-profile guides, console-damper buntons, technical maintenance, tension extensions, rope production, repair, technical maintenance.

 REFERENCES

1. Baklashov, I.V. (ed.) (1989), “Manual for the structure and installation of rigid shaft equipment of vertical shafts of mines and mines (to SNiP II-94-80)”, [Manual for the structure and installation of rigid shaft equipment of vertical shafts of mines and mines], Nedra, Moscow, Russia.

2. USSR Ministry of Coal Industry on 08/09/89 and Gosgortekhnadzor USSR 22.02.82, (1982), "Safety standards for the structure and operation of rope guides of multi-rope winding installations", approved by the USSR Ministry of Coal Industry on 08/09/89 and Gosgortekhnadzor of the USSR on 02/22/82 and "Safety Standards for the structure and operation of rope guides of single-rope winding installations", Makeevka, Donbass.

3. Voloshin, A.I., Rubel, A.A. and Rubel, A.V. (2016), “Shaft equipment of vertical mine shafts and methods of refining” Geotechnical mechanics: International collection of science practices, no. 126, pp. 137-145.

4. Rubel, A.O. (2017), “Research of existing structures of tiers of shaft equipment of vertical shafts and development of tier schemes with rope-profile guides” Geotechnical mechanics: International collection of science practices, no. 134, pp. 211-227. https://doi.org/10.15407/geotm2017.134.211

5. Voloshin, A.I., Rubel A.A., and Rubel A.V. (2016), “Cantilever-damping buntons for the shaft equipment of vertical mine shafts” Geotechnical mechanics: International collection of science practices. no. 127 pp.89-98.

6. Ministry of Coal Industry of the USSR (1989), Instructions for the operation of steel ropes in mine shafts, Nedra, Moscow, Russia.

7. Minvugleprom of Ukraine (2010), Safety rules for coal mines: NPAOP 10.0-1.01-10. - Dijsnі vіd 22.03.2010. - Officially seen. [Regulatory document to the Minvugleprom of Ukraine. Standard], Kiev, Ukraine.

8. Ministry of Coal Industry of the USSR NIIGM im. MM. Fedorov(1999), Rigid shaft equipment of vertical mine shafts. Inspection, assessment of technical condition. Repair and reconstruction. Order and organization: KD 12.01.10.0601-99, Donetsk, Ukraine.

9. Minvugleprom of Ukraine (2005), Mine hanging extensions and parachutes. Wimogi before control: SOU 10.1.00174094.006:2005. - Officially seen. [Regulatory document to the Minvugleprom of Ukraine. Standard], Kiev, Ukraine.

10. Ministry of Coal Industry of the USSR (1964), Temporary industry guidelines for the inspection of the state of lining and shaft equipment of vertical shafts of mines. Approved by the on April 10, 1964: RTM 12.58.022-84, VNIMI, VNIIOMSHS, Kharkov, Ukraine.

11. USSR Ministry of Coal Industry on 08/26/1976, the USSR Ministry of Color and Metallurgy on 08/17/1976, the USSR Minchermet on 08/23/1976, the USSR Ministry of Chemical Industry on 08/27/1976, the USSR Ministry of Construction Materials on 08/12/1976 (1976), "Instruction for the technical inspection and testing of operational and tunneling lwinding installations" Moscow, Russia.

12. Belfort, V.E., Gorlin, A.M. and Morozov, V.I. (1986), Automation of equipment repair management at mining enterrises, Nedra, Moscow, Russia.

13. Rubel, A.O. and Rubel, O.V. (2018), “Decrease in the dynamics of the "cage-shaft equipment" system by the way of the construction of the damping tension extension” Collection of scientific practices of the Donbass State Technical University, no. 1, pp. 20-27.


About author:

Rubel Andrii Oleksandrovych, Candidate of Technical Sciences (Ph.D.), Chief Power Engineer, State Enterprise «United Company «Ukrvuglerestrukturyzatsiya», Kyiv, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.