- Details
- Parent Category: Geo-Technical Mechanics, 2015
UDC 621.002.5-752
Authors:
Bulat A.F., Acad. NASU, D. Sc. (Tech.), Professor
Dyrda V.I., D. Sc. (Tech.), Professor (IGTM NAS of Ukraine)
Puhalskiy V.N., Ph. D. (Tech.) (Western Mining and Processing Plant),
Lisitsa N.I., Ph. D. (Tech.), Senior Researcher (IGTM NAS of Ukraine),
Cherniy A.A., M.S (Tech.) (DSAEU),
Zabolotnaya Ye.Yu., M.S. (Tech) (IGTM NAS of Ukraine)
Abstract.
The problems of development and widespread industrial implementation of powerful vibrating machines and systems are considered for the realization of cyclic-flow technology of manufacture and delivery of uranium-bearing ore in underground mining. On the basis of elastomeric structures – elastic hangers and protective linings – high mountain feeders and systems are created for testing three types of ore deposits: thin and vein deposits; mining of average power; powerful mining ore deposits. Elastomeric constructions provided the technological operation mode of vibration machines, their specified long life, high reliability and quality in the difficult conditions of underground mining ores. The use of vibrating machines in the production and delivery of ore increased productivity of manufacture by 1.5-2 times, reduced to 5-10 times the number of hang-ups, reduced the number of explosions to eliminate them, reduced dust content of the atmosphere, totally eliminated injuries of miners, reduce noise, enabled by remote control automation of production process and delivery of ore. Ultimately that made it possible to create a cyclic-flow low-waste technology of ore mining.
Keywords:
low-waste cyclic-flow technology, vibrating feeders and systems, labor safety, production and delivery of ore
References:
1. Koshik, Yu.I., Dudchenko, A.Kh. and Avdeev, O.K. (2010), “Vibrodelivering systems on a boundary of centuries”, Geo-technical mechanics, no. 86, pp. 9-34.
2. Bulat, A.F., Pukhalskiy, V.N., Dyrda, V.I, Koshik, Yu.I., Dubchenko, A.Kh. and Lisitsa, N.I. (2011),“Vibrating machines for output and delivery uranium-containing of ores”, Geo-technical mechanics, no. 96, pp. 155-162.
3. Bulat, A.F., Dyrda, V.I. and Puhalskiy, V.N. (2013), “Machines and technologies for underground mining uraniferous ores on the basis of elastomeric constructions”, Geo-Technical Mechanics, no. 113, pp. 44-53.
About the authors:
Bulat Anatoly Fedorovich, Academician of the National Academy of Science of Ukraine, Doctor of Technical Sciences (D. Sc.), Professor, Director of the Institute, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Dyrda Vitaly Illarionovich, Doctor of Technical Sciences (D. Sc.), Professor, Head of Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Pukhalsky Viktor Nikolaevich, Candidate of Technical Sciences (Ph. D.), Chief Engineer in Eastern Mining and Processing Plant, Jeltye Vody, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Lisitsa Nikolay Ivanovich, Candidate of Technical Sciences (Ph. D.), Senior Researcher, Senior Researcher in Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Cherniy Alexandr Anatolyevich, Master of Science, Senior Teacher, Dnepropetrovsk State Agrarian and Economic University (DSAEU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
Zabolotnaya Elena Yur’evna, Master of Science, First Category Engineer in Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.
| File | Description | File size |
|---|---|---|
 4.pdf | THE DEVELOPMENT AND WIDESPREAD INDUSTRIAL IMPLEMENTATION OF VIBRATING MACHINES AND COMPLEXES OF MANUFACTURE AND DELIVERY OF URANIUM ORE WHILE UNDERGROUND MINING | 427 kB |