Kiriia R.V., Monastyrskyi V.F., Smirnov A.M., Nomerovskyi D.А. Limit angle of the belt conveyor inclination at transporting lumpy loads (2)
- Деталі
- Батьківська категорія: Геотехнічна механіка, 2020
- Категорія: Геотехнічна механіка, 2020, № 152
Geoteh. meh. 2020, 152, 87-98
https://doi.org/10.15407/geotm2020.152.087
LIMIT ANGLE OF THE BELT CONVEYOR INCLINATION ATTRANSPORTINGLUMPY LOADS
1KiriiaR.V., 1MonastyrskyiV.F., 1SmirnovA.M., 2NomerovskyiD.А.
1Institute of Geotechnical Mechanics named by N. Poljakov of NAS of Ukraine, 2Firm”Runa-Tekh”
UDC 004.942:622.647.8 (043.3)
Language: Russian
Annotation.
One of the ways to reduce capital costs and shorten length of conveyor transport routes is to increase angle of the conveyor inclination. As practice shows, limit inclination angle of general-purpose belt conveyors transporting bulk loads is 18°- 22°, while angle of natural slope of ore and coal is 40° and 35°, respectively. Such a difference between the angles of bulk load slope and limit inclination angle of the belt conveyor transporting the bulk loads is explained by the belt vibration impacting on the state of the transported load during its moving along the belt conveyor idlers. When exposed to vibrations, the solid-yielding state of the granular medium passes into a free-dispersed state at which inertial forces of the particles exceed the forces of internal coulomb friction between the particles. Moreover, as experimental studies have shown, granular medium moves relative to the conveyor belt at anglesof conveyor inclination of 18°–22°, i.e. limit angle of inclination of the conveyor belt transporting bulk load does not exceed 18°–22°. Today, limit angle of inclination of the conveyor belt transporting bulk loads is not studied well. In this research, the authors tried to determine limit angle of inclination of the conveyor belt transporting bulk loads by considering different types of the idlers: with rigid line, damping idlers and suspension idler with rope line. Limit angle of the conveyor belt inclination was determined on the basis of the change in momentum theorem applied to the lump during its moving over the idler and with the assumption that a lump, while passing over the idler, began sliding along the conveyor belt. As a result, analytical dependences of limit angle of the conveyor belt inclination on the conveyor parameters (belt tension and speed), parameters of idlers (distance between them), length of the bulk load and coefficient of friction of the lump against the conveyor belt were obtained. The studies of the obtained dependences showed that belt conveyors with damping idlers featured the widest limit angle of inclination, and inclination angel of the belt conveyors with suspension idlers had the least value. In addition, it was found that with increase of the conveyor belt speed and weight of the transported lumps limit angle of the conveyor inclination decreased and increased with increase of the belt tension. Further, critical speed of the conveyor belt was determined at which piece of load began sliding along the conveyor belt at any angle of the conveyor inclination.
Keywords.
Belt conveyors, lumpy load, limit angle of inclination.
References
1. Shakhmeyster, L.G. (1987), Teoriyairaschetlentochnykhkonveyerov [Theory and calculation of belt conveyers], Mashinostroenie, Mosсow, SU.
2. Begnold, R. (1985), “Shear experiments with a suspended suspension of large hard spheres in a Newtonian fluid”, in Shirko, I.V. (ed.), Mekhanika granulirovannykh sred: Teoriya bystrykh dvizheniy: Sb. Statey[The mechanics of granular media: The theory of fast movements: Sat. articles], Mir, Moscow, SU, pp. 44–63.
3. Kiriia, R.V. (1999), “Kinetic approach to the derivation of equations of motion of granular media”, Visnyk Dnipropetrovskogo universytetu. Mekhanika, no.2, pp. 143–150.
4. Monastyrskyi, V.F. and Kaitandzhan, E.G. (1981), “Determination of the limiting angle of inclination of the conveyor belt for bulk load”, in Dinamika i prochnost gornykh porod [Rock Dynamics and Strength], Naukova Dumka, Kiev, SU, pp. 15–24.
5. Demin, G.K., Shkarbun, O.E., Rykhalsky, Yu.A. and Kaitandzhan, E.G. (1983), “The effect of collision of load with roller supports on the limiting angle of inclination of the conveyor“, in Transportnyye i gornyye mashiny[Transport and mining machines], Naukova Dumka, Kiev, SU, pp. 57–62.
6. Monastyrskyi, V.F., Kiriia, R.V., Smirnov, A.N. and Mishchenko, T.F. (2012), “Determination of dynamic forces in the interaction of load flow with roller supports of belt conveyors of coal mines”, Geo-Technical Mechanics, no. 104, pp. 146–159.
7. Birger, I.A. and Mavlyutov, R.R. (1986), Soprotivleniye materialov: Uchebnoe posobiie [Resistance Materials: Study Guide], Nauka, Mosсow, SU.
8. Novikov, E.E. and Smirnov, V.K. (1983), Teoriya lentochnykh konveyyerov dlya krupnokuskovykh gornykh porod[Theory of conveyor belts for large rocks], Naukova Dumka, Kiev, SU.
About the authors
Kiriia Ruslan Visarionovych, Doctor of Technical Sciences (D. Sc), Senior Researcher, Principal Researcher in the Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poliakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. .
Monastyrskyi Vitalii Fedorovych, Doctor of Technical Sciences (D. Sc), Senior Researcher, Senior Researcher in the Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poliakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. .
Smirnov Andrii Mykolaiovych, Candidate of Technical Sciences (Ph.D), Senior Researcher in the Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poliakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. .
Nomerovskyi Denys Anatolovich, Candidate of Technical Sciences (Ph.D), Chief Designer, Firm Runa-Tekh, Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. ,