Dubinin M.V., Ilyin S.R. Determination of dynamic parameters for the systems “skip-shaft equipment” by the method of solid modeling

Деталі
Батьківська категорія: Геотехнічна механіка, 2020
Категорія: Геотехнічна механіка, 2020, № 150

Geoteh. meh. 2020, 150, 82-97

https://doi.org/10.15407/geotm2020.150.082

 

DETERMINATION OF DYNAMIC PARAMETERS FOR THE SYSTEMS “SKIP-SHAFT EQUIPMENT” BY THE METHOD OF SOLID MODELING

1Dubinin M.V., 2Ilyin S.R.

1Branch of Scientific Research Institute of Mine Mechanics named by M.M. Fedorov, Kyiv, 2Institute of Geotechnical Mechanics named by N. Poliakov of National Academy of Sciences of Ukraine

UDC 622.673.1:622.272.6

Language: Russian

Annotation.

With increased service life of the shafts the problem of ensuring safe movement of skips along the rigid reinforced guides is especially urgent both for designing of new shafts and reconstruction (modernization) of the old ones and requires a diverse and systematic study of the equipment, which is already in operation or newly designed, by the criterion of mutual suitability and high degree of failure-free operation. For old shafts that have geometrical disturbances due to geological processes and severe corrosion and mechanical wear, additional studies of interaction between the elements of the “skip – shaft equipment” (SSE) system are also needed in order to identify emergency sections of the shaft equipment and to make decisions and develop measures for bringing these sections to safe and trouble-free condition.  By the finite element modeling, we obtained rigidity parameters for the most common schemes of the shaft equipment and skip designs and amplitude-frequency parameters for the SSE systems widely used by the domestic coal-mining enterprises. The obtained calculation results for individual SSE elements and their interactions correspond to the results obtained by Garkusha and Dvornikov; however, this approach allows us to take into account all the design features of the SSE system equipment (as well as their interacting nodes) and geometric changes in shaft equipment due to geological and “time” factors (mechanical wear and corrosion). The possibility of determining the design flaws of the SSE system elements and their further consideration in the “selection” of rigidity and, accordingly, frequency characteristics for the SSE system elements makes the finite element modeling an indispensable tool both at the stages of designing the elements and their subsequent operation and/or possible reconstruction (with taking into account their actual technical condition). Long-term operation of the hoisting plants in difficult geological conditions inevitably leads to structural changes in their elements. At the same time, over the course of several decades, new types of basic units appear that change the design schemes of t this equipment. All this requires, when conducting expert studies and safety assessments, to carry out a significant amount of dynamic calculations that are not inherent in the classical Methodology developed by the Scientific Research Institute of Mine Mechanicsnamed by M.M. Fedorov. In this situation, the only way out is to develop a new methodological approach, which would take into account new changes and adequately and reliably evaluate the safety of the operation of the hoisting equipment under conditions of its high wear and growing deviations of its geometric parameters from the design values.

Key words:

dynamic parameters, lifting vessels, armouring, solid-state design

References

1. Płachno M. (2005) “New approach to the design of shaft steelwork”, Mining sciences 50, Issue 4, pp. 465-496.

2. Vorobel S.V., Trifanov G.D. and Kniazev A.A. (2007), “Dynamic Survey rigid reinforcement shafts Problems of the integrated development of mineral deposits in the Perm region”, Materials the edge scientific and technical conference of students, graduate students and young scientists , Perm Publishing House of Perm State Technical University,  Perm, RU, pp. 195 – 201.

3. Hansel J., Kawka G. and Plachno M. (1985), “An estimation of mine conveyance guiding”, Mechanika, Vol. 4, part 2, Wydawnictwo AGN, Krakow,  Pol. pp.115-128.

4. Dvornikov V.I. and Dubinin M. V. (2014), “Finite element modeling for stress-strain state of the mine trunks reinforcement that it has been made shaft skip”, Aktualnye problemy povysheniia effektivnosti I bezopasnosti erspluatatsii gorno-shakhtnogo I mefte-promyslovogo oborudovaniia [The issue of the day of increase of efficiency and safety of exploitation of mining and oil-commercial equipment], Materialy I Mezhdunarodnoy nauchno-prakticheskoy konferentsii “Gornaia elektromekhanika - 2014” [Materials of the I International science and practical conference «Mine electromechanics – 2014»],  Perm national research polytechnic university, Perm, Ru,  pp. 55-60.

5. State committee of Ukraine on industrial safety, labour protection and mountain supervision (2010), NPAOP 10.0-1.01-10. Pravila bezpeki u vugilnich shakhtakh [NPAOP 10.0-1.01-10 Rules of safety in coal mines], Kiev, Ukraine.

6. Ilyin S. R., Solomencev K. A. and Vasylkevych V. I. (2014), “Analysis of the influence of the form of box-shaped cross-section streak rigid reinforcement shafts on permissible speed of hoisting vessels”, Geo-Technical Mechanics, no. 120,  pp. 265-275.

7. Metodika raschyeta zhyestkikh armirovok vertikalnykh stvolov shakht [Method of calculating the rigid reinforcement vertical shafts] (1994), M.M. Fedorov Research Institute of mining mechanics (ed.), Donetsk, Ukraine.

8. Ilyin S. R. (2010) “The experience of dynamic apparatus control and estimation of exploitation system safety “vessel – reinforcement” of vertical mining shafts”, The International Journal of transport & logistics, pp.395-403.

9. Ilyin S. R. and Trifanov G.D. (2009), “Dynamic diagnostics of systems "vessel - reinforcement" vertical shafts”, Mining Equipment and Electromechanics, no. 8. pp. 29 - 34.

About the authors

Dubinin Mykhaylo Valeriiovych, Master of Scsence, Researcher, M.M. Fedorov Research Institute of mining mechanics (RIMM), Kyiv, Ukraine.

Iljin Serhii Rostyslavovych, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher of the Department of Rock Thermoaerodynamics and Automated Systems, Institute of Geotechnical Mechanics named by N. Poliakov of National Academy of Sciences of Ukraine (IGTM NAS of Ukraine), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.