Monastyrskyi V.F., Monastyrskyi S.V., Mostovyi B.I. Effect of water medium upon the process of ore disintegration in wet self-grinding mills
- Деталі
- Батьківська категорія: Геотехнічна механіка, 2019
- Категорія: Геотехнічна механіка, 2019, № 146
Geoteh. meh. 2019, 146, 91-98
https://doi.org/10.1051/e3sconf/201910900058
EFFECT OF WATER MEDIUM UPON THE PROCESS OF ORE DISINTEGRATION IN WET SELF-GRINDING MILLS
1Monastyrskyi V.F., 1Monastyrskyi S.V., 1Mostovyi B.I.
1Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine
UDC 622.724: 622.76
Language: English
Abstract.
This article presents the results of theoretical and experimental studies on the processes of destruction ore in wet self-grinding mills (WSGM). Depending on pH (hydrogen parameter) and Eh (oxidizing-restoration parameter) values, water medium is capable of penetrating into the lumps through cracks formed in the mother rock (germinal ones). Argillaceous and ochreous minerals being practically always available in mineralogical composition of the deposits of diamond-bearing raw material, form specific films on the mineral surfaces. When the lump and obstacles interact, surfaces are destructed, microcracks are closed at the expense of material elasticity, and a lump may be represented as a sphere inside of which there are minor cavities filled with the incompressible liquid. The equivalent circuit for determining the stress-strain state of a piece exposed to the load at an angle of repose of the material in motion are justified. In this case, a uniformly distributed pressure acts on the body of arbitrary shape, depending on the hydrostatic pressure of the pulp inside the drum and the force of hydrodynamic resistance). It is assumed that a piece has the shape of a sphere with a uniform structure, but in some of its parts there are cavities filled with an incompressible fluid. Under the action of forces inside the cavity wedging effects of water occur, the effect of which on the strength ores depends on the expansion force and the angle of the micro crack. The experimental researches are done under laboratory and industrial conditions. Effect of a wedging force upon the ore strength was determined experimentally under laboratory conditions using a plant for one-axial compression of samples from different ores and rocks; the plant was equipped with hydraulic press with 60 kN and computer for simultaneous recording of compression force and deformation. The research methodology stipulated that tests were carried out involving following samples: dry, previously wetted, solid, glued two-layer, and with a cavity. It was established that the disintegration of kimberlitic ore in WSGM is significantly influenced by the characteristics of the aquatic environment pH and Eh, the values of which vary from 3.2 to 7.0 and from -500 to +1020 mV.
Keywords: liquid, experiment, durability, equivalent circuit, hydrogen parameter, oxidizing-restoration parameter.
REFERENCES
1. Monastyrsky, V. F. and Soloviev, S. V. (2004), “Optimization of the modes of self-grinding mills during the enrichment of diamond-containing raw materials”, Gornyi Zhurnal: Izvestiya VUZov, no. 6, pp. 45–49.
2. Firm Kluff starts to carry out the project of processing of diamonds in Copeton (1990), Mining Mag., no. 1, pp. 62–68.
3. Monastyrsky, V. F. and Vorontsov, V. S. (2012), “Models of diamond-bearing ore disintegration in the aquatic environment of wet self-grinding mills”, Geo-Technical Mechanics, no. 104, pp. 146–159.
4. Goryachev, B. E. (2010), Tekhnologiya almazosoderzhashchikh rud [Diamond Ore Technology], MISIS, Moscow, Russia.
5. Langelier, W. F. (1946), “Chemical Equilibria in Water Treatment”, Journal of the American Water Works Association, no. 38, pp. 169–181.
6. Feоdosev, V. I. (1999), Soprotivlenie materialov [Resistance of materials], MSTU, Moscow, Russia.
7. Chanturia, V. A. and Vigdergauz, V. E. (2008), “Innovative technologies for processing technogenic mineral raw materials”, Gornyi Zhurnal, no. 6, pp. 71–74.
8. Dvoichenkova, G. P., Chernysheva, E. N., Savitsky, L. V. and Vorontsov, V. S. (2009), “Intensification of the processes of ore preparation and heavy-medium separation of diamond-containing raw materials of the Nyurbinskaya tube”, Gornyi Zhurnal, no. 6, pp. 72–7.
About the authors
Monastyrskyi Vitalii Fedorovych, Doctor of Technical Sciences (D. Sc), Senior Researcher, Senior Researcher in the Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.
Monastyrskyi Serhii Vitaliiovych, Candidate of Technical Sciences (Ph. D), Junior Researcher in the Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.
Mostovyi Borys Ivanovych, Master of Science, Principal Specialist in the Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnepr, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.