PRINCIPLES OF CONSTRUCTION OF CLUSTER MODEL PRODUCED SPACE OF CUTTING AREA METHANE-RICH COAL MINE

Details

Parent Category: Geo-Technical Mechanics, 2014

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 117

UDC[622.268.2:519.237.8]:51.007.57

Authors:

Bunko T.V., D.Sc. (Tech.), Senior Reseacher (IGTM NAS of Ukraine)

Kokoulin I.Ye., Ph.D. (Tech.), Senior Researcher (IGTM NAS of Ukraine)

Golovko S.A., M.S. (Tech.) (IGTM NAS of Ukraine)

Zhalilov A.Sh., M.S. (Tech.) (SP «Selidovugol»)

Bokij A.B., Doctoral Student (SHEI «DonNTU»)

Abstract.

The dynamics of seepage of liquids through porous materials is described by the Darsy equalization, here transmissivity of hard environment is determined by effective or opened porosity of array, which participates in the process of flow of the squeezed or incompressible liquid under action of the attached gradient of pressure. Emptinesses in a hard environment are different on sizes and form and is distributed in an array chaotically. Therefore for the design of porous environment the elements of theory of the multipolar systems, describing motion of liquid or gas in the elementary volume of array and current oriented on lines from an initial knot in eventual one under action of the attached gradient of pressures, are applied. Application of cluster model allowed to divide the produced space into elements in which different modes of motion of methane-air mixture are observed from lamynar to turbulent and to take into account influence of facilities of газоотсоса on degassing of the produced space.

Keywords:

cluster model, permeability of hard environment, laws of motion of air, gasootsos, produced space.

References:

1. Bokyy, B.V. and Bunko, T.V. (2011), “About the formalyzed invariant method  of description by nonlinear much-polar of areas of mine ventilation network with indefinite by a structure and aerodynamic parameters”,Geotekhnicheskaya Mekhanika [Geo-Technical Mechanics], no. 92, pp. 264-274.

2. Bunko, T.V., Borovsky, A.V. and Bokiy, A.B. (2013), “Development of methods of mathematical design of emission of mine methane ”,Geotekhnicheskaya Mekhanika [Geo-Technical Mechanics], no. 109, pp. 247-255.

3. Toropchyn, O.S., Golovko, S.A. and Bezkrovny, N.V. (2007), “Analytical method of determination of lines of current of losses of air through the produced space”, Geotekhnicheskaya Mekhanika [Geo-Technical Mechanics],  no. 69, pp. 277–288.

4. Bunko, Т.V., Kokoulin, I.Ye. and Golovko, S.A. (2013), “Generalized algorithm calculation of losses through the produced space for different charts of the ventilation of cutting areas”,Geotekhnicheskaya Mekhanika [Geo-Technical Mechanics], no. 108, pp. 65–73.

5. Smagin, A.N., Zavadskaya, T.V. and Nadeyev, D.V. (2010), “Modellingof industrial mine ventilation networks”, Naukovi pratsi Donetskogo natsionalnogo tekhnichnogo universitetu. Seriya “Problemy modelyuvannya ta avtomatizatsii proektuvannya” (MAP-2010), no. 8(168), pp. 15-23.

6. Khemelyng, P.V. and Yarusu, R. (2007), “Determination tasks of air-distribution in MVS”, Coal and safety, no. 16, pp. 20-27.

7. Shkundyn, S.Z., Ykonnykov, A.L. and Zinchenko, I.N. (2009), “Calculation of ventilation networks of coal mines by the method of inter-unit depressions”, Coal, no.1, pp. 35-37.

8. Zhou Xin-quart, Wu Bing and Du Hong-bing (2003), “Bases of fundamental sciences in the theory of mine ventilation”, Ziran kexue ban, J. China Univ. Mining and Technol Natur. Sci., vol. 32, no.2, pp. 133-137.

About the authors:

Bunko Tatyana Viktorovna, Doctor of Technical Sciences (D.Sc), Senior Researcher, Senior Researcher in the Department of Mineral Mining at Great Depths N.S. Polyakov  Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Kokoulin Ivan Yevgenyevich, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher in the Department of Mineral Mining at Great Depths N.S. Polyakov  Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Golovko Sofya Askhatovna, Master of Science, Junior Researcher in the Department of Rock Thermoaerodynamics and Automated Systems N.S. Polyakov  Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Zhalilov Alexandr Shamilyevich, Master of Science, Chief mechanical engineer of the state enterprise «Selidovugol», Selidovo, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Bokiy Alexander Borisovich, Doctoral Student of State higher educational establishment «National technical university» of Donetsk (SHEI «DonNTU») of Ministry of Education and Science of Ukraine (NMU), Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

• < Prev
• Next >