HOW FORM OF SECTION OF THE BOX-SHAPED GUIDES IN THE SHAFT STIFF EQUIPMENT IMPACTS ON THE CAGE PERMISSIBLE SPEED

Details

Parent Category: Geo-Technical Mechanics, 2015

Category: Geo-Technical Mechanics, 2015, Issue 120

UDC622.673.1:622.674.22

Authors:

Ilyin S.R., Ph.D. (Tech.), Senior Researcher

(IGTM NAS of Ukraine)

Solomencev K.A. Ph.D. (Tech.)

Vasylkevych V.I., M.Sc (Tech)

(RIMM)

Abstract:

Shaft stiff equipment with the welded box-shaped guides is associated with a number of negative phenomena such as corrosion and mechanical wear of the guides and, in particular, opening of the welded joints in the process of mine hoister operation. Today, means of production can produce a solid-rolled guide with no joints and with rounded corners. The guide rounded corners reduce contact area between side surfaces of the leading device and the guide. The article describes and analyzes feasibility of using the solid-rolled box-shaped guides instead of welded box-shaped guides in conditions of real gage widening in the active vertical mine shaft with taking into account dynamic deflection of the guides due to interaction with the cage.

Keywords:

stiff reinforcement, box-shaped guide, welded joint, radius of the guide rounding, dynamic deflection of the guide, permissible speed of the cage.

References:

1. Vasylkevych, V. I., Strelchenko, A. A. and Zhalilov, A. S. (2012), «Usovershenstvovaniye konstruktsii korobchatogo provodnika dlya podyemnogo sosuda vertikalnykh shakhtnykh stvolov», Problems of equipment operation shaft stationary, no. 106, pp. 207-226.

2. Ilyin S. R. (2008), «Razrabotka i obosnovaniye obshchey diagnosticheskoy modeli oborudovaniya shakhtnykh podyemnykh ustanovok», Geo-Technical Mechanics, no. 76, pp. 44-63.

3. Samusya V. I. and Ilнina S. S. (2012), «Vliyaniye parametrov rolokovykh napravlyayushchikh na kontaktnye nagruzki v sisteme “sosud-armirovka” shakhtnykh stvolov s narushennoy geometriyey», Mining Equipment and Electrical Engineering, no. 1, pp. 8-13.

4. Vasylkevych V. I. (2012), «Opredeleniye dopustimykh iznosov provodnikov i predelnykh otkloneniy shiriny kolei iz usloviya kinematicheskogo vzaimodeystviya podyemnogo sosuda s zhyestkoy armirovkoy stvola», Geo-Technical Mechanics, no. 93, pp. 210-225.

5.Metodika raschyeta zhyestkikh armirovok vertikalnykh stvolov shakht [Method of calculating the rigid reinforcement vertical shafts] (1994), M.M. Fedorov Research Institute of mining mechanics (ed.), Donetsk, Ukraine.

6. State committee of Ukraine on industrial safety, labour protection and mountain supervision (2010), 10.0-1.01-10. Pravila bezpeki u vugilnich shakhtakh [NPAOP 10.0-1.01-10 Rules of safety in coal mines], State committee of Ukraine on industrial safety, labour protection and mountain supervision, Kiev, Ukraine.

About the authors:

Ilyin Sergii Rostislavovich, Candidate of Technical Sciences (Ph.D), Senior Researcher at the Institute of Geotechnical Mechanics, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dniepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Solomencev Konstantin Anatolyevich,  Ph.D. (Tech.), Acting Chairman of the Board, M.M. Fedorov Research Institute of Mining Mechanics (RIMM), Dоnetsk, Ukraine

Vasylkevych Viktor Ivanovych, M. Sc (Tech), Researcher, M.M. Fedorov Research Institute of Mining Mechanics (RIMM), Dоnetsk, Ukraine

• < Prev
• Next >