Lopatin V.V. Objective technical monitoring of the condition of the sucker rod pumping unit

Details

Parent Category: Geo-Technical Mechanics, 2018

Category: Collection of scientific papers «Geotekhnicheskaya Mekhanika» Issue 142

Geoteh. meh. 2018, 142, 155-163

DOI: https://doi.org/10.15407/geotm2018.142.155

OBJECTIVE TECHNICAL MONITORING OF THE CONDITION OF THE SUCKER ROD PUMPING UNIT

LopatinV.V.

Author:

Lopatin V.V., Doctor of Technical Sciences (D.Sc.), Senior Researcher (IGTM, NAS of Ukraine)

UDC 622.673.1:681.514.54

Language: English

Annotation.

Today in Ukraine, the necessary intervals between controls, their content and volume are formed on the basis of statistical data. These statistics do not take into account the specific features of a particular SRPU, the real conditions of its operation, but only the SRPU type of SRPU type. The monitoring of SRPU, based on such monitoring and control, cannot be objective. Objective technical monitoring and monitoring of the state of the system requires that the actual real-time state be monitored, taking into account the factor analysis, which will significantly increase its turnaround time and reduce operating costs. A four-view classification of the main methods for controlling a sucker rod pumping unit (SRPU) has been proposed. The essence of each control method of a SRPU is disclosed. Made their comparative analysis and opportunities. The vibration control and monitoring of the pumping unit gearbox of the SRPU is considered in more detail. The strategy and experiment planning of the reduction gearbox of a SRPU has been developed using factor analysis. An experimental model installation of a SRPU has been developed and created, which allows implementing the developed strategy to study the effect of gearbox defects, its operating conditions and the influence of other elements of the SRPU on the vibration characteristics of a wellbore well pumping unit. It is shown that there can be no objective control when the necessary intervals between controls, their content and volume are formed on the basis of statistical data, without taking into account the specific features of a SRPU and the real conditions of its operation, but only the type is taken into account. An objective technical monitoring of a SRPU has been proposed, which will significantly increase its overhaul mileage and reduce operating costs.

Keywords:

monitoring, pumping unit, factor analysis, vibration characteristics, reduce operating costs.

References:

1. Ukraine Standard Office (1995), DSTU 2865-94. Kontrol neruynivnyi. Derzhavnyi standart Ukrainy [2865-94. Non-destructive control. State Standard of Ukraine], Derzhstandart Ukrainy, Kiev, Ukaine.

2. TNPVO "SIAM" (2006), Kontrol raboty burovogo nasosa. Kompleks SIDDOS[Control of drill deep pump operation. Complex SIDDOS], Izdatelstvo TNPVO "SIAM", Tomsk, Russia.

3. Zamihovsky, L. M., RovinskyV. A. and Yevchuk O.V. (2006), Diagnostika tekhnichnogo stanu shtangovykh glybynno0nasosnykh ustanovok [Diagnosis of the technical state of deep-pumping units], Simfoniya Forte, Ivano-Frankivsk, Ukraine

4. Karpash, O. M. (1997), “Non-destructive testing and technical diagnostics of oil and gas equipment and tools Non-destructive testing and technical diagnostics”, Matetials 2 nd Ukrainian Science. Tech. conf.   Dnipropetrovsk, p. 36.

5. Aliyev, T. M., Nadein, V. A., Rysikin, L. M. and Ter-Khachaturov, A. A. (1981), “Methods and means for controlling the technical condition of deep-pumping equipment”, Neftyanoe khozyaistvo, no. 5, pp. 57-59.

6. Lea, J. F.,  Winkler, H. V. and Snyder, R. E. (2000), “What`s new in artificial lift”, Word Oil, no. 221 (3), p.74.

7. Gaus, P.O., Lavrov, V.V. and Nalimov G.P. (2000), “Diagnostic capabilities of monoblock electronic dynamometers "SIDDOS-Avtomat", Neftyanoe khozyaistvo, no. 7, pp. 87-88.

8. UralNITI (2018), “Electronic portable dynamometer system "URAN-100", available at: httр: //uralniti.ru/, (Accessed 6 July 2018).

9. Kvantor-T (2018), “Mobile hardware and software complex of diagnostics of wells "Kvantor-3", available at: http://www.sprut.ru/quantor-t/prod.htm, (Accessed 6 July 2018).

10. Barker CAC  (1996), “Equipment and software for well control and control: Catalog of the company "Barker CAC",  Printed in the USA, New-York, USA.

11. Mikron (2018), “Dynamograph built-in micron-802”,  available at: http://www micron.ru/, (Accessed 6 July 2018).

12. PAK "KDS" (2012), “Software and hardware complex of research and diagnostics of SHNU”,  available at: http://www.neftegazprogress.ru/nauka-dneft.html, (Accessed 12 December  2016).

13. Texac Instruments (2012), “MSP-430 DataBook. Applikation Examples. Electricity Meters. Chapter 4”, available at: http://www.it.com, (Accessed 12 December  2016).

14. Barnes, et al. (2007), Integrated control system for beam pump systems, USA, Pat. № 7219723.

15. Svetlakova, S. V.(2008),  “Information-measuring system of dynamometry of wells, equipped with rods deep pumps“, Abstract of Ph.D. dissertation, tech sciences 11.05.16, Ufa, Russia.

16. Lopatin, V. V., Kopey, B. V. and Stefanyshin, O. I. (2010), Mobilnye izmeritelnye sistemy v neftegazovoy i gornodobyvayushchey promyshlennosti, [Mobile measurement systems in the oil and gas and mining industry. Monograph], IFNTUNG, Ivano-Frankivsk, Ukraine.

17. Lopatin, V.V. (2013), “Scientific bases for the development of a system for monitoring the technical condition of the hardening of shaft trunks“, D.Sc. Thesis, Instruments and methods for controlling and determining the composition of substances, Ivano-Frankivskiy National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine

18. Lopatin, V. and Leshchynskyi, S. (2016), “Outstanding issues means of objective control problem in mines”, Promoting robust ethical practices for the extractive industries, Johannesburg, South Africa, 15-17 February 2016.

19. Lopatin, V. V. (2016), “Objective technical monitoring and diagnostics of the condition of gearboxes of well bore pumping station”, Materialy mezhdunarodnoy nauchno-tekhnicheskoy konferentsii [Materials of the international scientific and technical conference], Mashyny, obladnannya ta materialy dlya zbilshennya vnutrishnogo vyrobnytstva ta dyversyfikatsiyi postachannya nafty i hazu [Machines, equipment and materials for increasing domestic production and diversification of oil and gas supply], Ivano-Frankivsk, p. 191-194

20. Watson, et al. (2005), “Reciprocating pump control system”, USA, Pat. №6890156.

21. Ananiev, V. D., Sizarev, V. D. et.al. (2015), “Problems of nuclear power facility vibroacoustic diagnostics”, Proc. of the topical seminar on management of ageing of research reactors, Geesthacht, Hamburg, IAEA, Vienna, Austria, p.485-494.

About the author:

Lopatin Valeriy Volodymyrovych, Doctor of Technical Sciences (D.Sc.), Senior Researcher, Senior Researcher in Department of Geodynamic Systems and Vibration Technologies, M.S. Polyakov Institute of Geotechnical Mechanics NAS of Ukraine (IGTM, NAS of Ukraine), Dnipro, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

• < Prev
• Next >