Nazarov O.Ye., Gankevych V.F., Pashchenko O.A., Kiba V.Ya. Reduction of power-intensivity at rotary-percussive drilling
- Деталі
- Батьківська категорія: Геотехнічна механіка, 2020
- Категорія: Геотехнічна механіка, 2020, № 150
Geoteh. meh. 2020, 150, 146-155
https://doi.org/10.15407/geotm2020.150.146
REDUCTION OF POWER-INTENSIVITY AT ROTARY-PERCUSSIVE DRILLING
1Nazarov O.Ye., 2Gankevych V.F., 2Pashchenko O.A., 2Kiba V.Ya.
1Institute of Geotechnical Mechanics named by N. Poliakov of National Academy of Sciences of Ukraine, 2National Technical Univercity “Dnipro Politechnic”
UDC 622.24.085
Language: Russian
Annotation.
In the article, mechanisms for rotary-percussive drilling of hard rocks and submersible hydraulic hammers in particular are considered. The existing designs of hydraulic hammers are reviewed, and their disadvantages are specified. The requirements for hydraulic hammers and advantages of the submersible hydraulic hammers are considered. A new method for improving the performance of hydraulic hammers is proposed, which increases efficiency of hydraulic hammers up to 90-95%. A new design of a double-action submersible hammer is presented, which implements a new method of its operation. It is stated that advantage of this design of the hammer is that the shock is taken by maximum possible area of the accelerator part, which occupies the entire cross section of the hammer, and which is perpendicular to the oncoming water flow. This design allows using maximum of the hydroshoke energy for the primary acceleration of the striker. Also, the designed hydraulic hammer makes it possible to further accelerate the striker to the required speed by using the water pressure and its flow rate created by the pump unit by way of displacing the valve liner out from the high-pressure chamber by the created liquid pressure. A detailed description of the new design of the double-action submersible hydraulic hammer is shown in the figures of working positions of its parts. Processes of fluid motion and movement of the details of the submersible hydraulic hammer for one full cycle of its operation are described. General methodology for the mathematical calculation of geometric parameters of the newly-designed double-action submersible hydraulic hammer is presented, in particular, stroke size of the striker, accelerator and accelerator valve. The advantages of the designed submersible hydraulic hammer and area of its most effective application are described. Thus, the double-action submersible hydraulic hammer makes it possible to comprehensively use energy of the fluid flow for removing destruction products as well. The design of the submersible hydraulic hammers increases drilling efficiency by 2-2.5 times in comparison with remote hydraulic hammers and by 1.5-2 times in comparison with existing submersible hydraulic hammers. This design is equally operable when drilling vertical, horizontal and other boreholes with arbitrary angle of inclination through the rocks of any hardness and is recommended for drilling boreholes with small and medium diameter.
Key words:
hammer, destruction, drilling, borehole, power intensity, rotary-percussive drillung.
References
1. Vasilev L.M. [and others] (2017), Rizets kavitatsiinui dlia obertalnogo burinnia shpuriv ta sverdlovyn u girskykh porodakh serednioi mitsnosti [Cavitational cutter for rotary drilling of holes and wells in rocks of medium strength], Kyiv, UA, Pat. 115203 UA.
2. Krasovskyi I.S. (2016), “Device for determining the force of impact during dynamic tests of structures”, Geo-Technical Mechanics, no. 129, Pp. 198 - 204.
3. Vasiliev L.M. and Demchenko V.S. (2006), Parametry mashin dlia vrashchatelnogo bureniia skvazhin malogo diametra [Parameters of machines for rotary drilling of small diameter wells], Lira, Dnipropetrovsk, UA.
4. Zhulay Yu.A. (2006), “Hydrodynamic cavitation”, Geo-Technical Mechanics,, no. 64, pp. 142 - 149.
5. Pashchenko O.A. and Gankevich V.F. (2016), “Technological reserves of energy exchange in the minds of a dydrostatic clutch”, Zbagachennia korysnykh kopalyn, vyp. 64 (105), pp. 36-42.
6. Gankevich V.F., Kurnat N.L., Pashchenko O.A. and Kiba V.Ya. (2018), “On the effect of laser radiation on the reliability of the cutting tool of mining machines”, Geo-Technical Mechanics, no. 137, pp. 10-16.
About the authors
Nazarov Oleksandr Yevhenovych, Doctoral Student in the Department of Pressure Dinamic Control in Rocks, Institute of Geotechnical Mechanics named by M. Poliakov NAS of Ukraine, Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її. .
Gankevych Valentyn Feodosiiovych, Candidate of Technical Science (Ph.D.), Senior Researcher, Associate Professor of the Department of Engineering and Design in Mechanical Engineering, National Technical University “Dnipro Polytechnic” (NTU «DP»), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.
Pashchenko Oleksandr Anatoliiovych, Dnipro Polytechnic National Technical University, Director of the Interdisciplinary Educational and Scientific Institute of Continuing Full-time and Distance Education, Candidate of Technical Science (Ph.D.), Associate Professor of the Department of Oil and Gas Engineering and Drilling, National Technical University “Dnipro Polytechnic” (NTU «DP»), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.
Kiba Viacheslav Yakovych, Master of Science, Senior Lecturer of the Department of structural and theoretical mechanics, National Technical University “Dnipro Polytechnic” (NTU «DP»), Dnipro, Ukraine