Smirnov A.M., Beihul V.O. Belt conveyers rollers average term of service
- Деталі
- Батьківська категорія: Геотехнічна механіка, 2019
- Категорія: Геотехнічна механіка, 2019, № 147
Geoteh. meh. 2019, 147, 164-171
https://doi.org/10.1051/e3sconf/201910900095
BELT CONVEYERS ROLLERS AVERAGE TERM OF SERVICE
1Smirnov A.M., 2Beihul V.O.
1Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 2Dniprovsk State Technical University
UDC 622.647.2:681.5
Language: English
Abstract.
Conveyor framework with roller support is an important part of a belt conveyor, the technical condition of which determines the reliability of the conveyor as a whole. Reliability of the framework is determined by the reliability of the rollers of the roller supports, as the reliability of the supporting metal structures is much higher. An important indicator for assessing the reliability of a roller is its term of service, depending on the type, parameters of roller supports and operating conditions. The paper is proved to one of the important conveyer transport system task – to dynamic factor and roller’s term of service (TS) determination. The task solving permit to evaluate the different designs belt conveyers reliable. The article represent the tasks of belt conveyers roller’s average TS determination were set and solved for the different types of roller supports. Dynamic efforts arised with the loading motion and caused with belt bend are principal factor for the calculation of TS rollers. The graph of dependence roller’s average TS from belt velocity for different roller’s types were obtained. The service life of the conveyor rollers depends on the linear load, the parameters of the conveyor, the composition of the transported load and the type and parameters of the roller support. At the same time, with an increase in the speed of the conveyor belt for the considered types of rollers, the average term of service of the rollers decreases. When the belt speed changes to certain values, the service life of the rollers for hard roller supports is somewhat higher than for overheard roller supports, and the term of service of rollers for damping roller supports is somewhat higher than for damping overhead roller supports. At the same time, the term of service for damping overhead and damping roller supports is significantly higher than for hard and overhead. In addition, when the belt speeds are higher than some values for all considered types of roller supports, the roller's term of service can sharply decrease due to the appearance of resonant phenomena associated with belt vibrations during the movement of pieces of large fractions. Achieved results may be applied in mining, metallurgical and building industry.
Keywords: roller’s, bearing, term of service, belt conveyer, roller supports, belt velocity.
REFERENCES
1. Galkin, V.I., Dmitriev, V.G., Dyachenko, V.P. (2005), Sovremennaya teoriya lentochnykh konveyerov gornykh predpriyatiy [Modern theory of belt conveyers for mining enterprises], MSMU, Moskva, Russia.
2. Seyed, A.Sh. (2009), “Roller supports of powerful belt conveyers linear sections rational parameters substantiation for mining enterprises”, Ph. D. Thesis, Mining Machines, Moscow, Russia.
3. Shakhmeyster, L.G., Dmitriev, V.G. (1983), Veroyatnostnye metody pascheta transportiruyushchikh mashin [Probabilistic methods of transporting machines calculation], Mashinosrtoenie, Moskva, Russia.
4. Sprishevskiy, A.I. (1969), Podshipniki kacheniya. [Antifriction bearing], Mashinosrtoenie, Moskva, Russia.
5. Chermenskiy, O.N., Fedotov, N.N. (2003), Podshipniki kacheniya. Spravochnik-katalog [Antifriction bearing. Handbook-catalogue], Mashinosrtoenie, Moskva, Russia.
6. Monastyrskyi, V.F., Kiriya, R.V. Smirnov, A.N. (2011), “Bulk freight and roller supports interaction statistic model for belt conveyers”, Geo-Technical Mechanics, no. 93, pp. 87–93.
7. Zenkov, R.P., Ivashkov, I.N., Kolobov, P.I. (1987), Mashiny nepreryvnogo transporta [Continuous bulk freight stream transportation machines], Mashinosrtoenie, Moskva, Russia.
8. Monastyrsky, V.F., Kiriya, R.V., Smirnov, A.N. (2013), “Large fraction bulk material motion on a belt conveyer roller supports investigation”, Geo-Technical Mechanics, no. 112, pp. 35–47.
About the authors
Smirnov Andrii Mykolaiovych, Candidate of Technical Sciences (Ph.D), Senior Researcher in Department of Geomechanics of Mineral Opencast Mining Technology, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine (IGTM, NAS of Ukraine), Dnipro, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.
Beihul Vsevolod Olehovych, Candidate of Technical Sciences (Ph.D), associate professor of engineering technology department, Dniprovsk State Technical University (DSTU), Kamianske, Dnipropetrovsk region, Ukraine, Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.