EROSION PROCESSES IN COMBINED PLASMACHEMICAL REACTORS

Details

Parent Category: Geo-Technical Mechanics, 2014

Category: Geo-Technical Mechanics, 2014, Issue 117

UDC 662.87:533.92:532.5

Authors:

Kholiavchenko L.Т., Ph.D. (Tech.), Senior Researcher (IGTM NAS of Ukraine)

Demchenko S.V., M. S. (Tech.) (IGTM NAS of Ukraine)

Nazarov A.E., M. S. (Tech.) (IGTM NAS of Ukraine)

Abstract.

The article describesprocesses which occur in combined plasmachemical reactors and which affect erosive wear of electrodes made of ordinary electrode graphite, grade EG – 0. Rate of such graphite anode erosive wear in electric and magnetic fields with controllable value is specified.

It is stated that rate of cathode spot rotation has an effect on the mass flow rate of electrode erosion in different oxidizing medium, and an oxidizing medium in the reaction chamber (air, carbon-containing) has an effect on the mass flow rate of graphite electrode erosion.

It is specified that dependences exist between mass flow rate of electrode erosion, arc current and rate of the electrode rotation, and direct dependence exists between the rate of electrode rotation and magnetic field of solenoid.

Keywords:

gasification, reactor, plasma, electrode, erosion, resource temperature.

References:

1. Kesaev, I.G. (2008), “Katodnye processy elektricheskoy dygi” [Cathodic processes arcing], Science Moscow, Russia.

2. Uryukov, B.A. (2001), “Theory of electrode erosion in non-stationary spots of electric arc”, “Eksperimentalnye issledovaniya plazmotronov”, Science Siberian Branch, Novo-Siberian,  pp. 371-382.

3. Rakhovsky, V.I. (2000), “Fizicheskie osnovy kommutatsii elektricheskogo toka v vakuume” [Physical basis of switching the electric current in a vacuum], Science, Moscow, Russia.

4. Lakomskiy, V.I., Taran, A.Ya. and Zamkovoy, S.I. (2004). “Erosion graphite cathodes electric arc in a nitrogen-oxygen gas mixture”, Izvestiya SO AN SSSR, Seriya tekhnicheskikh nauk, vol 1,  no. 4, pp. 113-120.

5. Rakhovsky, V.I. (2003), “Erosion of electrodes in the constricted discharge”,  Izvestia Sibirskogo otdeleniya AN SSSR, vol. 1, no. 3, pp. 11-27.

6. Pierson, O.H. (2003), Hand book of Carbon, Graphite, Diamond and Fullerenes: Properties, Processing and Applicatio, NoesPublications, Park Ride, New Jersey, USA.

7. Pigida, E.Y, Kholiavchenko, L.Т., Davydov, S.L.and Demchenko, S.V. (2012), “The calculation of the form factor of arc plasma reaction chamber for convercion of carbon-bearing medium”, Geotekhnicheskaya Mekhanika [Geo-Technical Mechanics], no. 98, pp. 193-200.

8. Koroteev, A.S., Mironov, V.M. and Svirchuk, Yu.S. (1993), “Plazmotrony: konstruktsii, kharakteristiki, raschyet” [Plasma torches: design, performance, calculation], Mechanical Engineering, Moscow, Russia.

About the authors:

Kholiavchenko Leonid Тimofeevich, Candidat of Technical Sceinses (Ph.D), Senior Researcher, Senior Researcher in Department of Rock Breaking Problems, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Demchenko Sergey Vyacheslavovich, Master of Science, Junior Researcher in Department of Rock Breaking Problems, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

Nazarov Aleksandr Evgenyevich, Master of Science, Engineer of Department of Rock Breaking Problems, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

• < Prev
• Next >