EXPERIMENTAL RESEARCH OF RUBBER RHEOLOGY

Details

Parent Category: Geo-Technical Mechanics, 2015

Category: Geo-Technical Mechanics, 2015, Issue 121

UDC 622.23:05459

Authors:

Dorokhov M.A., Doctoral Student (IFNUOG),

Agaltsov G.N., Master of Science,

Novikova A.V., M.S. (Tech.),

Kalgankov Ye.V., Doctoral Student,

Tsanidy I.N., Doctoral Student (IGTM NAS of Ukraine),

Cherniy A.А., M.S. (Tech.) (DSAEU),

Lutsenko S.N., Doctoral Student (IGTM NAS of Ukraine)

Abstract.

We consider the technique of determining the rheological properties of rubbers, including: selection of rubber stamps; definition of the quasi-static characteristics of rubber samples; determining the dynamic characteristics of the samples. We also consider two methods for determining the rheological properties of the rubber elements: the first method is based on the use of the relaxation peak in the frequency dependence of the absorption coefficient of the material; the second method uses the parameters of the hysteresis loop recorded by changes in a wide range of loading. It is shown that for the rubber used for the production of load-bearing elements, the most appropriate is a four-parametric fraction-exponential function of Rabotnov; b-method should be used when rubber is filled with more than 65 parts by weight of rubber carbon black.

Keywords:

rubber, rheology, Rabotnov’s kernel, elastic potential

References:

1. Bulat, A.F., Dyrda, V.I., Zvyagilskiy, Ye.L. and Kobets, A.S. (2011), Prikladnaya mekhanika uprugo-nasledstvennykh sred. Tom 1. Mehanika deformirovaniia i razrusheniia elastomerov [Applied mechanics of elastic-hereditary media. Vol. 1. Mechanics of deforming and breaking down of elastomers], Naukova dumka, Kiev, Ukraine.

2. Dyrda, V.I., Agal’tsov, G.N., Novikova, A.V. (et al.) “Determination of physical and mechanical properties of the filled rubber”, Geo-Technical Mechanics, no. 116, pp. 158-173.

3. Marvalova, B. (2007), “Viscoelastic properties of filled rubber. Experimental observations and material modelling”, Engineering Mechanics, vol. 14, no. 1/2, pp. 81-89.

4. Al-Malki, Z.T., Al-Nasir, E.A., Khalaf, M.N. and Zidan, R.K. (2013), “Study the effect of recycled tire rubber on the mechanical and rheological properties of TPV (HDPE/Recycled tire rubber)”, Open Journal of Polymer Chemistry, vol. 3, pp. 99-103.

5. Brown, R.P., Butler, T. and Hawley, S.W. (2001), Ageing of rubber – accelerated heat ageing tests results, Rapra Technology Limited.

About the authors:

Dorokhov Maksim Anatol’yevich, Master of Science, Doctoral Student of the Department Oil and Gas Equipment in Ivano-Frankovsk National Technical University of Oil and Gas (IFNUOG), Ivano-Frankovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Agaltsov Gennady Nikolaevich, Master of Science, Junior Researcher of Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Novikova Alina Vyacheslavovna, Master of Science, Junior Researcher in Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Kalgankov Evgeniy Vasilyevich, Doctoral Student in Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Tsanidy Ivan Nikolaevich, Doctoral Student in Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Cherniy Alexandr Anatolyevich, Master of Science, Senior Teacher, Dnepropetrovsk State Agrarian and Economic University (DSAEU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Lutsenko Sergey Nikolayevich, Doctoral Student in Department of Elastomeric Component Mechanics in Mining Machines, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

• < Prev
• Next >