Pigida Ye.Yu., Kholiavchenko L.Т., Demchenko S.V., Davydov S.L. How thermal parameters of reaction chamber influences the thermal conversion efficiency in the carbon-bearing environment
- Details
- Parent Category: Geo-Technical Mechanics, 2016
- Category: Geo-Technical Mechanics, 2016, Issue 130
Geoteh. meh. 2016, 130, 204-213
HOW THERMAL PARAMETERS OF REACTION CHAMBER INFLUENCES THE THERMAL CONVERSION EFFICIENCY IN THE CARBON-BEARING ENVIRONMENT
Pigida Ye.Yu., Kholiavchenko L.Т., Demchenko S.V., Davydov S.L.
IGTM NAS of Ukraine
UDC 662.87:533.92
Abstract. The high-temperature heating of carbon-bearing fuels with particle size of 50-200 microns was investigated in order to establish rational and kinetic thermal parameters, their influence on the heat-and-mass transfer and efficiency of thermal reactions in the reaction chamber at a changed specific heat flow qc = 104 ÷ 107 W/m2 and gas temperature Тк = (2÷6)·103K. The thermal parameter influence on the solid fuel gasification process was determined on the example of coal particles and water vapor heating at convective and radiant heat transfer. The calculation results were compared, and it was concluded that influence of radiative heat transfer prevailed in the total heat flow in plasma reactor when Тк > 5·103 K. Volume of the reaction chamber and its operation are calculated with taking into account thermal and kinetic parameters of the fuel high-temperature heating. It is shown that a process of the fuel thermal transformations is effective at temperature Тк ≤ 3000 K in the plasma-chemical reactor of the combined type.
Keywords: carbon-bearing environment, chamber, heating, temperature, kinetic parameters, thermal conversion, volume, efficiency of the process.
REFERENCES
1. Bulat, A.F., Pigida, Ye.Yu. et al. (2008), Fiziko-tekhnicheskie osnovy protsessov konversii i gazifikatsii uglerodosoderzhashchikh mineralnykh sred pri vozdeystvii vysokotemperaturnykh kontsentrirovannykh potokov energii: otchet o NIR [Physical and technical bases of conversion and gasification processes carbonaceous mineral medium under the influence of high concentrated energy flows: Report of research], IGTM of the NAS of Ukraine, Dnepropetrovsk, Ukraine.
2. Krukovskiy, V.K., Lebedev, V.V., Kolobova, E.A. (1976), "Study of coal polydisperse heating process high-temperature gas-cooled", Khimiya tverdogo tela, no 6, р. 26-30.
3. Bulat, A.F., Kholyavchenko, L.T. et al. (2015), Issledovanie i analiz sposobov i tekhnicheskikh sredstv energoprevrashcheniy dispersnykh uglerodsoderzhashchikh sred putem intensifikatsii teplo- i massoperenosa v gazovom potoke vysokotemperaturnoy plazmy: otchet o NIR [Investigation And Analysis Of Ways And Technical Meansenergy Conversion Disperse Carbon-Containing Media By Intensifying Heat And Mass Transfer In A Gas Stream High-Temperature Plasma: Report of research], IGTM of the NAS of Ukraine, Dnepropetrovsk, Ukraine.
4. Kuvaev, Ju.V.and Babiy, V.M. (1986), Gorenie ugolnoy pyli i raschet pyleugolnogo fakela [The burning of coal dust and coal-dust torch calculation], Energoatomizdat, Moskow, USSR.
5. Grigorev, V. A. (1988), Teoreticheskie osnovy teplotekhniki [Theoretical basics of heat], Energoatomizdat, Moskow, USSR.
6. Kholyavchenko, L.T., Pigida, Ye.Yu., Davydov, S. L., Ukolova, T.M. and Vasilev, L.M. (2013), "Some aspects of the kinetics of plasma-jet processing of coal-water dispersions process", Materialy XXIII Mezhdunarodnoy Nauchnoy shkoly Khristianovicha [Materials XXIII International Scientific School named Khristianovich], Deformirovanie i razrushenie materialov s defektami i dinamicheskimi yavleniyami v porodakh i vyrabotkaakh [Deformation and destruction of materials with defects and dynamic phenomena in rocks and workings], Simferopol, Ukraine, p. 285 – 288.
About the authors:
Pigida Yevgeniy Yurevich, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher in Department of Rock Breaking Problems, N.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .
Kholiavchenko Leonid Тimofeevich, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher in Department of Rock Breaking Problems, N.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepr, Ukraine, demchik@
bk.ru.
Demchenko Sergey Vyacheslavovich, Master of Science (M.S.), Junior Researcher in Department of Rock Breaking Problems, N.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .
Davydov Sergey Leonidovich, Master of Science (M.S.), Junior Researcher in Department of Rock Breaking Problems, N.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepr, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.