Dzerzhinska O.V. Effect of bearing faces design in the walking excavator in its interaction with soils in different deposits
- Details
- Parent Category: Geo-Technical Mechanics, 2017
- Category: Geo-Technical Mechanics, 2017, Issue 134
Geoteh. meh. 2017, 134, 179-187
https://doi.org/10.15407/geotm2017.134.179
Dzerzhinska O.V., Doctoral Student
(DSMA)
EFFECT OF BEARING FACES DESIGN IN THE WALKING EXCAVATOR IN ITS INTERACTION WITH SOILSIN DIFFERENT DEPOSITS
UDC 621.879.323
Language: Ukrainian
Abstract. Study of travel mechanism in the walking excavators is a very important task, practical significance of which is determined by the need to find ways of how to improve undercarriage in the excavator-draglines through modernization of the ski bearing faces of the travel mechanism in the walking excavator.
Data of such studies are extremely necessary for determining actual parameters, which characterize operation of travel mechanism in different conditions, and finding out reasons of unsatisfactory traveling of excavators on different soils.
In this article, a new design of bearing elements for the skies is presented, which speeds up traveling of walking excavator due to the ski reduced skidding at each step. Further, results of experimental studies in conditions of rocky and weak soils (clay sands) are presented, which showed that implementation of the new design of bearing elements would greatly increase the excavator-dragline floatation.
Keywords: excavator-dragline, walking motor, ski, bearing elements
REFERENCES
1. Poderni, R.Ju.(2007), Mehanicheskoeoborudovaniekaryerov [Mechanical equipment of quarries], Izdatelstvo Moskovskogo gosudarstvennogo gornogo universiteta, Moscow, RU.
2.Scheffler, M. and Payer, G. (1980), Osnovy rascheta i konstruirovanija podemno-transportnyh mashin [Foundations of calculation and design of lifting and transporting machines], Mashinostroenie, Moscow, RU.
3. Efremenkov, A.B. (2009), Gornye mashiny i oborudovanie [Mining machinery and equipment], Izdatelstvo Tomskogo politichnicheskogo universiteta, Tomsk, RU.
4. Balovnev, V.I. (2010), Opredelenie optimalnykh parametrov i vybor zemleroynykh mashin v zavisimosti ot usloviy ekspluatacii [Determination of optimal parameters and selection of earth-moving machines depending on the operating conditions], MADI (GTU), Moscjw, RU.
5. Dzerzhinska, O.V. (2017), “Investigation of the technical and economic issue of using a stepping crank-weighting mechanism on draglines”, Modern aspects of mechanization and automation of energy-intensive industries.All-Ukrainian. Scientific-practical Conf., April 11-12, 2017. Collection of Scientific Papers, Pokrovsk, UA, pp.. 32-37.
6. Dzerzhinska, O.V., Krupko, I.V., and Kotlyar, А.V. (2017), “Influence of the shape of the reference surface of the ski on the movement of a walking excavator”, Bulletin of NTU "KhPI". Series: Techniques in a machine industry, no. 26 (1248), pp.81–85.
About the authors
Dzerzhinska Olga Vitaliivna, Doctoral Student of the Department "Lifting-transport vehicles" of the Donbas State Machine-Building Academy, Kramatorsk, This email address is being protected from spambots. You need JavaScript enabled to view it. .