Rubel A.O. Study of existing structures of floors of vertical shaft equipment and development of schemes for floors with the rope- profiled guides

Details

Parent Category: Geo-Technical Mechanics, 2017

Category: Geo-Technical Mechanics, 2017, Issue 134

Geoteh. meh. 2017, 134, 211-227

https://doi.org/10.15407/geotm2017.134.211

 

Rubel A.O., Ph.D (Tech.), SP «OK«Ukrvuglerustrukturizatsiya»)

STUDY OF EXISTING STRUCTURES OF FLOORS OF VERTICAL SHAFT EQUIPMENT  AND DEVELOPMENT OF SCHEMES FOR FLOORS WITH THE ROPE- PROFILED GUIDES

UDC 622.6:622.674:622.673.1

Language: Russian

Abstract. Various schemes of the mine shaft equipment floors (rigid, flexible, with guides with non-periodic stiffness, with no buntons), their advantages and disadvantages were studied and analyzed, and typical schemes were developed for the shaft equipment layout with rope-profiled guides and console-damper buntons.

Implementation of the new shaft-equipment schemes in combination with rope-profiled guides, damped console buntons will allow to: reduce number of guides and buntons located along the height of the shaft; reduce metal consumption of the shaft equipment; reduce dynamic load on the "cage-shaft equipment" system; prolong service life of the shaft equipment due to the less horizontal oscillations of the guides; reduce diameter of the shaft due to the use of more rational layouts of the shaft equipment; reduce aerodynamic resistance of the shaft due to the use of more rational layouts of the shaft equipment; increase rigidity of the rope-profile guides due to the use of rational layouts of the shaft equipment; improve safety of the shaft equipment and hoisting complex operation; cut operating costs of the shaft equipment repair and maintenance; cut capital expenditures for the shaft equipment assembling.

Keywords: mine vertical shaft, shaft equipment schemes, rope-profiled guides, console buntons.

REFERENCES

1. «Reinforcement of the vertical auxiliary trunk with fastening of shootings on anchors» (2017), Coal of Ukraine, no. 5-6, pp.     .

2. "Safety standards for the design and operation of wire rope conductors of multi-channel hoisting installations" approved by the USSR Ministry of Geophysics on 09.08.89 and Gosgortekhnadzor of the USSR on 22.02.82 and "Safety standards for the design and operation of rope conductors of single-channel hoisting installations" approved by the USSR Ministry of Coal Industry on 09.08.89 and Gosgortechnadzor The USSR on 22.02.82, Makeevka - Donbass: MakNII, 1982.

3. Manual on the design and installation of rigid reinforcement of vertical shafts of mines and mines (to SNIP II-94-80). - State Committee of the USSR for Public Education Moscow Order of Labor Red Banner Mining Institute. Under the editorship of the professor, Dr.Sc. I.V. Baklashova - Moscow, 1989 - 108 p.

4. "Instruction for operating steel ropes in shafts" (Moscow: Nedra, 1989).

5. Rubel, A.O., Rubel, A.O. (2016), Konsolno-dempfiruyuchy rozstril [Cantilever-damping bunton], Kyiv, UA, Pat. IPC (2016.01), E21D 7/00.

6. Rubel, A.O., Rubel, A.O. (2017), Kanatno-profilniy provіdnik armuvannya shakhtnogo stovbura [Rope-type explorer of reinforcement of mine trunk], Kyiv, UA, Patent No. 115478 of the IPC E21D 7/02 (2006.01) B66B 7/02 (2006.01).

7. Voloshin AI, Rubel AA. and Rubel A.V. (2016), «Equipping of vertical mine shafts and the method of him accumulation», Geo-Technical Mechanics, no. 126, pp. 137-145.

8. Blokhin S.Ye. and Rubel A.O. (1999), «About some questions of the design of rigid reinforced armor», Vibration in engineering and technology, no. 3, pp. 49-50.

9. Rubel, A.A. (1999), «On the possibility of improving the equipment of shafts by creating reinforcements that have nonparametric properties», Zbirnyk prats mizhnarodnoy konferentsii, prysvyachenoi V.O. Murzinu [Collection of labours of the International conference, devoted to V.O. Murzin], Dnipropetrovsk, UA, pp. 47-49.

10. Typical materials for the design of 401-011-87-89. Section and reinforcement of vertical barrels with rigid conductors / Yuzhgiproshakht. Kharkov, 1989.

11. Prokopov A.Yu., Stradanchenko S.G. and Pleshko M.S. (2005), Novye resheniya v proyektirovanii zhestkoy armirovki vertikalnykh stvolov [New solutions in the design of rigid reinforcement of vertical trunks], Publishing house of magazines. "Izv. universities. North-Caucasus. region ", Rostov-na-Donu, RU.

About the authors

Rubel Andrii Oleksandrovych, Candidate of Technical Sciences (Ph.D), Chief Power Engineering Specialist of DP «OK «Ukruglerestrukturizatsiya», Kiev, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

• < Prev
• Next >