Bubnova O.А. Surveying support of internal dumping and recultivation of lands when reclamation natural relief forms

Details

Parent Category: Geo-Technical Mechanics, 2018

Category: Geo-Technical Mechanics, 2018, Issue 142

Geoteh. meh. 2018, 142, 148-154

DOI: https://doi.org/10.15407/geotm2018.142.148

SURVEYING SUPPORT OF INTERNAL DUMPING AND RECULTIVATION OF LANDS WHEN RECLAMATION NATURAL RELIEF FORMS

Bubnova O.А.

Author:

Bubnova O.А.,Candidate of Technical Sciences (Ph.D.), Senior Researcher (IGTM, NAS of Ukraine)

UDC 622.12:622.271.4

Language: Ukrainian

Annotation.

It is shown that, while transiting from internal dumping to reclamation with creation of natural relief shape, surveying supervision is needed since, according to the adopted technology, it is necessary to reclamate certain shape of relief in certain locations and with given parameters. Since relief reclamation should be performed on great territory, the most rational is to use aerosurveying. In order to reduce cost of the works, it is proposed to perform aerial aerosurveying from unmanned aerial vehicles (UAVs) equipped with digital cameras and GPS equipment. Advantages of the modern aerosurveying equipment and analysis of existing models are presented in this paper, as well as the most suitable for the aerosurveying type of UAV is proposed. It is proposed to perform aerosurveying before and after deposit development. Comparison of images with the help of graphic software complexes allows determining the required volume of works and spatial location of those shapes of relief, which should be reclamated according to the program. In the future, it is proposed to fix positions of axes of long relief shapes with the help of electronic tacheometers and to mark them in the ground by wooden piles with recorded required height of the earthfill. It is further proposed to fix piles along the grid, and length of driving square of the grid should be determined according to the complexity of the relief. It is proposed to separately mark the surface at the stages of mining technical preparation of the surface and laying a potentially fertile layer of rocks. The proposed technology of work allows to achieve the accuracy of reproduction of natural forms of relief about 90 %. Errors in the formation of relief are due to the technical capabilities of mining equipment, which is used for laying rocks.

Keywords:

surveying works, aerosurveying, reclamation, relief reclamating, spatial location.

References:

1. Chetverik, М.S., Maleev, Ye.V. (2017), “The rationale for the restoration of meso0relief using a spreader-thrower”, Geo-Technical Mechanics, no. 137. p. 202-212.

2.  Barton, J. D. (2012), “Fundamentals of Small Unmanned Aircraft Flight”, Johns Hopkins APL Technical Digest, vol. 31, no 2. P. 132-149.

3. Civil Aviation Safety Authority, Australia (2003),. "Unmanned Aircraft and Rocket Operations", CASR Part 101, CASR, Australia.

4. Avanesov, G.A. and Kienko, Yu.P. (2017), “Airborne surveying complexes”, Geoprofy, no 1. p. 8-17.

5. Urbahs, A., Petrovs, V. and Savkovs, K. (2010), “Operation of unmanned aerial vehicles in the general airspace system”, Space and Global Security of Humanity Riga, p. 21..

6. Maziar Arjomandi (2011), “Classification of Unmanned Aerial Vehicles”, MECH ENG 3016 Aeronautical engineering,The University of Adelaide Australia, 49 p.

7. Digital aerial cameras UltraCam, available at: http://www.jena.ru/files/demo/AW-UltraCamCameraSystem.pdf (Accessed 12/11/2017).

8. Geoscan technologies for surveying, available at: http://www.geoscan.aero/ru/blog/600 (Accessed 03/10/2018).

About the author:

Bubnova Оlena Anatolііvna, Candidate of Technical Sciences (Ph.D.), Senior Researcher, Senior Researcher in Department of Geomechanics of Mineral Opencast Mining Technology Institute of Geotechnical Mechanics name by N. Polyakov of National Academy of Sciences of Ukraine (IGTM, NASU), Dnіprо, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it. .

• < Prev
• Next >