FEATURES OF DEWATERING THE DEEP-SEA ORGANIC-MINERAL SEDIMENTS IN THE BLACK SEA BY MЕTHOD OF FILTRATION
- Деталі
- Батьківська категорія: Геотехнічна механіка, 2015
- Категорія: Збірник наукових праць "Геотехнічна механіка" Випуск-120
UDC622.794.3
Authors:
ShevchenkoO. Ye., Doctoral Student
(State HEI «National Mining University»)
Abstract:
The paper covers experimental findings on dewatering the deep-sea organic-mineral sediments by method of filtration. The deep-sea sediments ‒ coccolith and sapropel silts - were sampled in the Black Sea.
The tests were carried out with the help of compression equipment. Compression pressure variation was at a range of 0,5...10 MPa. It was found that sapropel and coccolith sediments could be referred to the strongly compressible soil. The filtering process of sapropel silts, unlike filtering of coccolith sediments, occurs with filter medium clogging. The dependencies between specific productivity of the plane filter and pressure rate and duration of filtration are shown in the diagrams. The obtained data may be used for justifying parameters of machines used for dewatering the organic-mineral sediments.
Keywords: organic-mineral sediments, filtration, dewatering, processing.
References:
1. Dimitrov, D.P., Georgiev, G.C. and Dimitrov, P.C. (2006), “Some results of using the deep-sea organic-mineral sediments of the Black Sea in the agriculture”, Geoligiya i polesnye iskopaemye mirivogo okeana, no.1, pp. 76-80.
2. Baklan, V.Yu., Kolesnikova, I.P. (2015) “Investigation of marine sapropel as a filtering material”, Ekologiya Chernoga morya, available at: http://www.eco-mir.net/show/549/.
3. Babinets, A.E., Emelyanov, V.A. and Mytropolskiy, A.Yu. (1981), Fisiko-mekhanicheskie svojstva donnykh osadkov Chernogo morya [Physicomechanical properties of the Black Sea seabed sediments], Kiev, Naukova dumka, SU.
4. Reichmann, B. and Tomas, J. (2001), “Expression behaviour of fine particle suspensions and the consolidated cake strength”, Powder technology 4309, Mechanical Process Engineering, Department of Process Engineering and Systems Engineering, Otto-Хon-Guericke-University Magdeburg, Magdeburg, Germany.
5. Zhuzhykov, V.A. (1980), Teoriya i praktika rasdeleniya suspenziy [The theory and practice of suspension separating], Khimiya, Moscow, SU.
6. Leontyev, N.V. (2009), Osnovy teorii filtrazii: ychebnoe posobie [Fundamentals of the filtration theory: Textbook], Izdatelstvo zentra prikladnykh issledovanij pri mechaniko-matematicheskom fakultete MGU, Moscow, Russia.
7. Beresnjak, A.A., Kozyr, Ye.O. and Nesterenko, Ye.A. (2007), “Investigation of kinetic at filtration through disten with grain size of 40-50 um”, Zbagachennya korysnykh kopalyn, n. 27(68)-28(69), pp. 126-132.
8. Garkovenko, Ye.Ye. (1999), «Analysis of work conditions of the band filter press and development of effective dewatering modes of preparation products», Geo-Technical Mechanics, no. 15, pp. 16-19.
9. Anlauf, H. (2010), „Fest/Flüssig-Trennung durch Kuchenfiltration“, Global Guide of the Filtration and Separation Industry 2008-2010, pp. 150-156.
10. Naduty V. P., Eliseyev, V. I., Lutsenko, V. I. (2011), «Mathematical model of lowering of the liquid layer in porous medium», Geo-Technical Mechanics, no. 92, pp. 3-14.
11. Problemy sapropelevykh osadkov Chernoga morya [The problem of sapropel sediments in the Black Sea] (2010), OMGOR, Kiev, Ukraine.
12. Zytovich, N.A. (1963), Mechanika gruntov [Soil mechanics], Gos. izd. literatury po stroitelstvu arkhitekture i stroitelnym materialam, Moscow, SU.
13. Alles, C.M.and Anlauf, H. (2003), „Filtration mit kompressiblen Kuchen: effiziente Konzepte für eine anspruchsvolle Trennaufgabe“, Chemie Ingenieur Technik, Vol. 75, no. 9, pp. 25-32.
14. Beloglazov, I.N. and Golubev, V.O. (2002), Osnovy rascheta filtrazionnykh prozesov [Fundamentals of calculation the filtration processes], Izdatelskij dom “Ruda i metally”, St. Petersburg, Russia.
15. Tomas, J. (2001), “Preßfiltration/ Praktikum”, Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik, Institut für Verfahrenstechnik, Lehrstuhl für Mechanische Verfahrenstechnik, 17 S.
About the author:
Shevchenko Oleksandr Yevgenievich, Doctoral Student, State Higher Educational Institution “National Mining University”, (State HEI “NMU”), Dnepropetrovsk, Ukraine, e-mail: Ця електронна адреса захищена від спам-ботів. вам потрібно увімкнути JavaScript, щоб побачити її.