ABOUT A METHOD OF PRESENTING RESULTS OF MATHEMATICAL MODELLING OF THE LOADED BELT MOTION ON THE CONVEYOR ROLLER CARRIAGE

Details

Parent Category: Geo-Technical Mechanics, 2015

Category: Geo-Technical Mechanics, 2015, Issue 122

UDC004.926.8:622.647.2

Authors:

BulatA.F., acad. NASU, D. Sc.(Tech.), Professor,

Kiriya R.V., Ph.D (Tech), Senior Researcher,

Larionov N.G., Doctoral Student

(IGTM NAS of Ukraine)

Abstract.

The mathematical models of the loaded belt moving on the three-roller supports of the belt conveyer are presented. The models are based on the theory of hard cylinders rolling on the viscous-elastic cylindrical plates with taking into account pressing deformation and belt and  load bending.  For analyzing models and estimating impact of parameters on the coefficient of resistance a method of successive approximation was applied. Relative errors of the ptoposed dependences for the coefficient of resistance do not exceed 5%.

Keywords:

belt conveyer, coefficient of resistance, deeply-sagging belt.

References

1. Baryshev, A.,(2004), Obshchaya kharakteristika i ustroystvo krutonaklonnykh lentochnykh konveyrov ,[ General characteristics of the device and the steeply inclined belt conveyor], Kharkov, Ukraine.

2. Dmitriev, V. and Diachenko, V., (2005), Sovremennaya teoriya lentochnyh konveerov gornyh predpriyatiy [The modern theory of belt conveyors mining enterprises],MGGU, Moscow, Russia.

3. Kiriya, R. and Larionov, N., «Determination of the resistance movement of the ribbon roller idler conveyor belt by the deformation load» Collection of scientific works of the NSU , no. 41., pp. 89–97.

4. Monastyrsky, V. and Shahunova, T., «The choice of the maximum angle of inclination of belt conveyors», Sbornyk trudov mezdunarodnoy nauchno-technicheskoi konferencii Machinostroenie i technosfera XXI veka [Proceedings of International Scientific Conference "Engineering and Technosphere of the XXI century], part 2, pp. 153-158

5. Zenkov, R., (1964) «Mechanics of bulk goods», [Mekhanika nasypnykh gruzov], MGGU, Moscow, Russia.

6. Kiriya, R. and Larionov, N., «Determination of the optimal parameters of the tray conveyor belt deep grooved», Geo-Technical Mechanics, no. 114., pp. 27–36.

7. Oreshkin, V.,(2004) Posobiye po proyektirovaniyu konveyyernogo transporta, [Manual for the design of conveyor transport], Moscow, Russia.

8. Shachmeister, L. and Dmitriev, V. (1987), Teorya i raschet lentochnyh konveerov [The theory and practice using belt conveyors], Mashinostroenie, Moscow, Russia.

About the authors:

Bulat Anatoly Fedorovich., Academician of the National Academy of Sciences of Ukraine, Doctor of Technical Sciences (D. Sc.), Professor, Director of the Institute, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Kiriya Ruslan Vissarionovich, Candidate of Technical Sciences (Ph.D), Senior Researcher, Senior Researcher in Department of Mining Transport Physics and Mechanics, M. S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Larionov Nikolay Grigorevich, Master of Science, Doctoral Student in Department of Mining Transport Physics and Mechanics, M. S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Sciences of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

• < Prev
• Next >