THE EQUATION OF THERMAL ENERGY BALANCE FOR THE LEAK CONTROL BY METHOD OF FIXED VOLUMES

Details

Parent Category: Geo-Technical Mechanics, 2015

Category: Geo-Technical Mechanics, 2015, Issue 122

UDC622.457.2:620.165.29

Authors:

VoloshinA.I., Сor. Member NASU,

Ponomarenko S.N., Ph.D. (Tech.), Senior Researcher (IGTM NAS of Ukraine)

Gubenko D.I., M.S. (Tech) (Yuzhnoye State Design Office)

Abstract.

The work is focused on thermodynamic analysis of parameters which characterize a process of gas escaping from the controlled object with taking into account its heat exchange with the environment.

A heat balance equation was formulated, which describes energy distribution when leakage from the hollow objects is monitored by the fixed volume method. The methodology assumes using of two vessels, in one of which (reference vessel) initial measurement parameters are fixed, and in the other (compensation vessel) current measurement parameters are recorded. Thermal stabilization of these vessels minimizes thermal perturbations caused by gradients of environmental parameters. Energy distribution was analyzed at monitoring leakage from the hollow object by the fixed volume method. Thermodynamic parameters of physical processes, which occurred in a closed thermodynamic system were investigated with taking into account rate of the system leak proofness and heat exchange with the environment. Pattern of the energy distribution in the reference and compensation vessels inside the thermostat was set. Interdependence was showed between internal work of the gas, which was used for monitoring the leakages, and the job which was performed for this gas mass motion.

Keywords: leakage monitoring, fixed volume method, reference and compensation vessel, leakage, heat exchange, environment, energy, job.

References:

1. Maslovskiy, V.V. (2009), Formirovanie svoystv nadezhnosti elementov transportnykh truboprovodnykh energeticheskikh sistem i regionalnoy ekologicheskoy bezopasnosti pri ikh proizvodstve i remonte [Formation properties of reliability of the elements of pipeline transportation and energy systems of the regional ecological security in their manufacture and repair], Kharkiv National Academy of Municipal Sector, Kharkiv, Ukraine.

2. Kutukov, S.Ye. (2004), "Improvement in pipeline leak detection system's responsiveness, robustness and rapidity", Oil business, vol. 2, pp. 29 – 45.

3. Bondarenko, V.I., Kuzmenko, A.M., Gryadushchiy, Y.B., Kolokolov, O.V., Kharchenko, V.V., Tabachenko, N.M. and Pochepov, V.N. (2002), Tekhnologiya podzemnoy razrabotki plastovykh mestorozhdeniy poleznykh iskopaemykh [Technology of underground mining  of mineral deposits], Polygraphist, Dnepropetrovsk, Ukraine.

4. Drosdova, L.G. (2007), Stazionarnye mashiny i ustanovki [Stationary machines and installations], DVGTU, Vladivostok, Russia.

5. State committee of Ukraine on industrial safety, labour protection and mountain supervision (2010), NPAOP 10.0-1.01-10. Pravila bezpeki u vugilnich shakhtakh [NPAOP 10.0-1.01-10 Rules of safety in coal mines], Kiev, Ukraine.  

6. State Mining and Technical Supervision Russia in the composition of its GD 26.260.010-2002 (2002), 26.260.14-2001:Sosudy i apparaty, rabotayushchie pod davleniem. Sposoby kontrolya germetichnosti. Otraslevoy standart [26.260.14-2001. Vessels and apparatus work under pressure. Control techniques the tightness. Industry Standard], available at: http://www.atis-ars.ru/txt/docs/ОСТ/ОСТ 26.260.14-2001.doc, (Accessed 6 May 2014).

7. Bulat, A., Voloshyn, O., Ponomarenko, S., and Gubenko, D. (2013) “New-generation technique and technology for leakage tests”, Annual Scientific-Technical Collection “Mining of Mineral Deposits”, School of Underground Mining, Proc of VII International scientific-practical conference, Netherlands, CRC Press/Balkema, p. 1-4.

8. Koretsky, M.D. (2004), Engineering and chemical thermodynamics, JOHN WILEY & SONS, INC., Hoboken, NJ.

9. Borgnakke, C. and Sonntag, R.E. (2009), Fundamentals of thermodynamics, 7th ed., International student version, Wiley, Hoboken, NJ.

10. Buchdahl, H.A. (2009), The Concepts of Classical Thermodynamics, Cambridge University Press, Cambridge, UK.

11. Dmitriyeva, V.F. and Prokofyev V.L. (2001), Osnovy fiziki: Uchebnoye posobiye dlya studentov vuzov [Fundamentals of Physics: Textbook for students], Graduate School, Moscow, Russia.

12. Kudinov, V.A. and Kartashov, E.M. (2007), Tekhnicheskaya termodinamika [Engineering Thermodynamics], Graduate School, Moscow, Russia.

About the authors:

Voloshin Alexei Ivanovich, Doctor of Technical Sciences (D.Sc.), Professor, Corresponding Member of the National Academy of Science of Ukraine, Deputy Director of the Institute, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Ponomarenko Sergei Nikolaevich, Candidate of Technical Sciences (Ph. D.), Senior Researcher of Department of Vibratory Transporting Systems and Complexes, M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM, NASU), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

Gubenko Dmitry Ivanovich, Master of Science, State Enterprise “Design Office” Yuzhnoye" by M.K. Yangel (Yuzhnoye State Design Office), Dnepropetrovsk, Ukraine, This email address is being protected from spambots. You need JavaScript enabled to view it.

• < Prev
• Next >